Schematic for Compaq computer power supply.

Vintageman · Joined: 08 Jul 2007 Posts: 3 Location: USA

I have an old (4 or so years old) Compaq power supply. I wish to use it as a power supply for an LED lighting project. BUT I do not have a schematic, nor know what leads give what power so I can not be sure what is what. I would rather operate from known data rather then just using a multi-meter on it. Does anyone have the data for the following supply?
Model: DPS-200PB-103E REV 02 P/N: 152769-001
Spare Number: 153652-001

Thanks to all for any help forth coming.

Lynn
_________________
Remember: When Using Experience As Your Guide The Test Always Comes Before The Lesson! Smile

Guest · Posted: Mon Jul 16, 2007 1:30 pm Post subject:

blak led is gnd red is +5v yellow is +12 any meter can tell you that but no meter can tell you t5o have the mother loaded otherwise smoke

Vintageman · Joined: 08 Jul 2007 Posts: 3 Location: USA

I wish to thank the guest who helped me with the output of my power supply. This helped me very much, and will make my project much easier.

Also I will make sure there is a load on the supply so as not to 'smoke it'! Laughing

Again...thanks.

Lynn
_________________
Remember: When Using Experience As Your Guide The Test Always Comes Before The Lesson! Smile