electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
LED on new speakers not working

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
dave151



Joined: 23 Aug 2007
Posts: 2

PostPosted: Thu Aug 23, 2007 8:19 pm    Post subject: LED on new speakers not working Reply with quote

I bought some new speakers the sound seems to be find but there is 1 LED in each speaker and 1 speaker is not lit. check link.

http://static.filefront.com/images/personal/c/consciz/34384/qvchbiyist.thumb500.jpg

I would like to fix the problem if possible, if not I guess some how turn the other LED off, as you can see it looks bad 1 on, 1 off.
I don't really want to send them back for this because they were only cheap speakers and it will cost a 10 for sending it back.
Is it possible to open up speakers without messing anything and to fix this? They are magnetically shielded if it makes a difference.
Let me know if any more info or pics are needed.
Back to top
View user's profile Send private message
vtech



Joined: 08 May 2006
Posts: 1264
Location: USA

PostPosted: Fri Aug 24, 2007 1:17 am    Post subject: Reply with quote

Either way, you'd need to get access inside the speaker. Can't be sure, but looking at the pix, appears that you may be able to go thru the center speaker? I do know that a lot of the cheaper made speakers are rather difficult to take apart without some sort of cosmetic damage.
Back to top
View user's profile Send private message
dave151



Joined: 23 Aug 2007
Posts: 2

PostPosted: Fri Aug 24, 2007 9:06 am    Post subject: Reply with quote

ok, im not too worried if a bit of the paint chiped or something but it wont mess up the sound or something by opening them?
Back to top
View user's profile Send private message
vtech



Joined: 08 May 2006
Posts: 1264
Location: USA

PostPosted: Fri Aug 24, 2007 3:20 pm    Post subject: Reply with quote

No, it should not as long as it can be put back together.
Back to top
View user's profile Send private message
Guest






PostPosted: Fri Aug 24, 2007 3:38 pm    Post subject: Reply with quote

when you take it apart looks at the LEDS each one has 2 wires sticking out they maybe connected in series one after the other if that is so breaking a connection will shut the string off . or if oyu do not want ot get inside than there must be feed wires for the LEDS by trail and error find the speakers wires then disconnect the other wire that will kill it for good. my choise is not to get inside.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Електроника София - Service Manuals Free Download - Prikachi - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Search - Jabse.InK  - Pulsator

Connector Pinout Forum - Новини - SnimkiOt.com - безплатен DNS - Whois разузнаване - Poblizo.com : пътешествия