electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Kenwood AR-304 Receiver: Volume Display Negative

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
timh
Guest
PostPosted: Mon Jan 08, 2007 10:32 pm    Post subject: Kenwood AR-304 Receiver: Volume Display Negative Reply with quote
I was attaching some new speakers and antenna to my receiver when the sound stopped (I may have inadvertently unplugged the unit during this process). When I adjusted the volume, I noticed that the numbers were negative. As I turn the dial from left to right, the numbers increase from, say, -65, -64, -63,...-2, -1, 0). When it gets to zero, the numbers do not go positive, it just stays on zero.

According to the manual, you can reset the system by holding down the power button and then plugging in the unit. This may have reset the system but it did not correct the problem. Thoughts?
Back to top
fongs
Guest
PostPosted: Mon Jan 15, 2007 7:31 am    Post subject: Re: Kenwood AR-304 Receiver: Volume Display Negative Reply with quote
timh wrote:
I was attaching some new speakers and antenna to my receiver when the sound stopped (I may have inadvertently unplugged the unit during this process). When I adjusted the volume, I noticed that the numbers were negative. As I turn the dial from left to right, the numbers increase from, say, -65, -64, -63,...-2, -1, 0). When it gets to zero, the numbers do not go positive, it just stays on zero.

According to the manual, you can reset the system by holding down the power button and then plugging in the unit. This may have reset the system but it did not correct the problem. Thoughts?


Hi there,

Does your amp still works?

Your amp is displaying the Volume in dB gain. It's normal function as 0dB is the max. gain of the amp.
Back to top
taecsupertech
Guest
PostPosted: Mon Sep 24, 2007 1:03 am    Post subject: ar-304 remote codes Reply with quote
My Ar-304 remote stoppe working, I am not sure if it is the unit or the remote. Does anyone have the remote codes in a file that I can use with a universal remote?

please reply [email protected]
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия  

Latest Service Manuals : Datron 4000A Reference c20120828 [2] Dat • PHILIPS TPF1.1U LA CHASSIS LCD TV SM.par • ald1102 ALD • B51-8557-20-PCB1 Kenwood • [radial thru-hole] SE Series Teapo • SF22SP-230VAMP . Various • Rectangles.mesa Oct77 xerox • sw7600g panasonic • power-inverter dps-279 37-42coll lcd Phi • Sony VGN-FE(MBX-152)- Sony •