electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Toshiba Menu Problem

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
BCorson
Guest





PostPosted: Sun Dec 30, 2007 9:56 pm    Post subject: Toshiba Menu Problem Reply with quote

Hello, I'am working on a tv for a friend.This is a Toshiba TZ 55X71 Chassis TAC 9966. The problem started out as bad Convergance ICs, I replaced them with a quality set. I also checked the resistors that were close by.When we turned it back on the converg. was way out(like it was before).Now, when I went to the menu and chose convergance it takes me to the screen and says press enter to change color, or press exit to choose area of screen (1 thru 9). It will let me pick a number for spots on the screen, and that is it, it will not show a crosshatch to do the moving of the color. The top and bottom of the picture are bowed. I tried the service menu, butt I don't know enough about this tv to do any good. I found a 50 point (or something close to that)grid, butt again I dont know how to do any moving.I may be in the wrong menu, can you tell me the right way to use the service menu on this set? I know the convergance generator could be bad, butt I think it is built on to one of the boards, not just a stand alone that can be unplugged. Are there other resistors or caps I may have missed ? Any help would be great, you guys have been so helpful in the past. Thanks again, Brad
Back to top
minnie



Joined: 18 Aug 2005
Posts: 2877
Location: Hell

PostPosted: Sun Dec 30, 2007 10:03 pm    Post subject: Reply with quote

On the remote, press mute, press and hold mute, while holding mute press menu on tv. S will come up on set. On remote press menu then 9 it will bring up your grid. 3 changes the color, 2 is up, 4 is left, 6 is right, 5 0r 8 is down. 7 is store new value.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Електроника София - Service Manuals Free Download - Prikachi - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Search - Jabse.InK  - Pulsator

Connector Pinout Forum - Новини - SnimkiOt.com - безплатен DNS - Whois разузнаване - Poblizo.com : пътешествия