View previous topic :: View next topic |
Author |
Message |
kulik Guest
|
Posted: Sat May 13, 2006 5:58 pm Post subject: IBM ThinkPad battery refill |
|
|
I changed Li-Ion cells in lapptop ThinkPad T22 battery, but there is no voltage on output of the battery gas-gage electronic. Before it was OK.
On battery side of gas-gage electronic is 11.4V.
During the refill process the gas-gage has been disconnected completely and later connected to cells again.
I have two explanations
1. the electronic inside disconnect the output
2. the electronic inside is damaged because I connected cells in correct polarity but random order (not ground first, max. plus second, ...).
There are 4 MOSFET driven by M61040FP and processor M37516.
Pls, do you have any advice? |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
FunkwerkZittau P123639Mono sch RFT • Disassembling-Hard-Drive-4052 IBM • TVD2710 Orion • Panel LG Display LC720DUQ-SCM2 0 [DS] . • • hfe philips fw 750c es Philips • 1500z SWAN • Service Manual Sharp • C20-1663-0 System 360 Operating System U • K650 BRAUN •
|