View previous topic :: View next topic |
Author |
Message |
kulik Guest
|
Posted: Sat May 13, 2006 5:58 pm Post subject: IBM ThinkPad battery refill |
|
|
I changed Li-Ion cells in lapptop ThinkPad T22 battery, but there is no voltage on output of the battery gas-gage electronic. Before it was OK.
On battery side of gas-gage electronic is 11.4V.
During the refill process the gas-gage has been disconnected completely and later connected to cells again.
I have two explanations
1. the electronic inside disconnect the output
2. the electronic inside is damaged because I connected cells in correct polarity but random order (not ground first, max. plus second, ...).
There are 4 MOSFET driven by M61040FP and processor M37516.
Pls, do you have any advice? |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
V9079-90001 V9079B TD-SCDMA User 2527s a • 058ats LG • [radial] MIN-13 Series Joemaster • aj-15 HEATHKIT • s a4 t panasonic • Compaq Armada 100S and COMPAQ • cd74hc166 Harris Semiconductor • [bi-polar axial] RMN Series Richey • bsc030n03msg rev1.16 Infineon • RCD 300 PASSAT B6 grundig •
|