electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
hitachi 51uwx20b no picture
Goto page Previous  1, 2, 3
 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
Juice83
Guest





PostPosted: Thu Oct 01, 2009 1:29 am    Post subject: Reply with quote

jts1957 wrote:
Take the value of the resistor - add 10% and subtract 10%. If the value you read falls within this range - resistor is good. Example: 100 ohm is good if reads anywhere between 90 and 110 ohms. Wink

I only used 10% as an example, yours may be 5%?


thanks...both too high and too low means bad resistor
Back to top
Juice83
Guest





PostPosted: Thu Oct 01, 2009 1:37 am    Post subject: Reply with quote

I noticed alot of people say their I.C. chips are stk392-110 or 150 or whatever...Why am I the only person that has stk394 in mine? While testing my resistors I noticed that my tv has been repaired before due to the fact that a resistor was soldered on the wires of the old one. Basically this dude cut the resistor off the wires (or whatever u call the two silver things that get soldered to the circuit board) and soldered the new one on so it sticks up about an inch higher than the others
Back to top
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Thu Oct 01, 2009 11:19 pm    Post subject: Reply with quote

STK394-160 replaces all the others.
Back to top
View user's profile Send private message Send e-mail
445NDO



Joined: 11 Oct 2009
Posts: 2

PostPosted: Sun Oct 11, 2009 1:53 am    Post subject: Thanks for the update Reply with quote

minnie wrote:
STK394-160 replaces all the others.
Very Happy
Back to top
View user's profile Send private message
445NDO



Joined: 11 Oct 2009
Posts: 2

PostPosted: Sun Oct 11, 2009 1:54 am    Post subject: Reply with quote

minnie wrote:
STK394-160 replaces all the others. Thanks for the update Very Happy
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Goto page Previous  1, 2, 3
Page 3 of 3

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия