View previous topic :: View next topic |
Author |
Message |
maynagl Guest
|
Posted: Thu Mar 12, 2009 7:01 pm Post subject: Vision PTS4241 Plasma TV fault |
|
|
I have a 42 inch plasma model number PTS4241 which has Orion chassis PWS-42. Have checked Power Supply board and all outputs are fine at 190V, 75V and 5.2V. The fault is no picture but sound is ok. I am looking at the Y board PC42V-PYS40-01 (PW4240_SUS_Y_040830_Rev.1) and would appreciate some tips. There is a standard fault with the FMSD102A being short but this takes out two resistors as well normally and this is not the case with this one. Any tips how to test or any circuit diagrams/ manuals etc? Believe also available in Australia/ NZ as Conwa PTS4241. |
|
Back to top |
|
|
gervais.bazin
Joined: 13 Apr 2009 Posts: 1
|
Posted: Mon Apr 13, 2009 12:18 pm Post subject: Re: Vision PTS4241 Plasma TV fault - Orion PWS-42 |
|
|
Hello,
i have the same problem (sound, no picture, sus y suspect).
I don't know the problem with FMSD102, can you explain ?
Did you find the fault ?
I also search for schematics...
Bye,
gervais bazin
France
maynagl wrote: | I have a 42 inch plasma model number PTS4241 which has Orion chassis PWS-42. Have checked Power Supply board and all outputs are fine at 190V, 75V and 5.2V. The fault is no picture but sound is ok. I am looking at the Y board PC42V-PYS40-01 (PW4240_SUS_Y_040830_Rev.1) and would appreciate some tips. There is a standard fault with the FMSD102A being short but this takes out two resistors as well normally and this is not the case with this one. Any tips how to test or any circuit diagrams/ manuals etc? Believe also available in Australia/ NZ as Conwa PTS4241. | |
|
Back to top |
|
|
alain28
Joined: 27 Jan 2008 Posts: 32 Location: France
|
Posted: Tue Jun 29, 2010 2:41 am Post subject: |
|
|
I have bought FMSD102 module ( in germany ([email protected]), for collegue, unfortunatly his has broken 3 of 4 SMD resistor of the group SG1,SG2,SG3,SG4
(one is 101 , 100 ohms)
Who could give him help to have the value?
Regards _________________ AM
France |
|
Back to top |
|
|
alain28
Joined: 27 Jan 2008 Posts: 32 Location: France
|
Posted: Fri Jul 09, 2010 6:08 am Post subject: |
|
|
It was not good informations vfrom the colleague.
The 3 missing resistors are in a group of RCZ10,11,12,13
Fortunatly somebody have confirmed that the value are all 100 ohms.
About RCZ1 and 14 it is ok on the board but I don't have news from the colleague.
AM _________________ AM
France |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
DiamondMax 22 SATA II maxtor • toshiba d-vr7kc sm TOSHIBA • 2MD-001 Kyocera • LeXfiles SXFun6in1v1.2 Aug2004 Philips • AVR3801 Denon • R3265A R3271A Spectrum Analyzer Vol II S • AXIAL TAPING, Cut Lead & Lead Forming an • pdtc144e series Philips • General EP4000 096 Minolta • LC7.2E LA LCD TV.part06 Philips •
|