electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
hyundai hlt 3773 LCD stuck in standby

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
mase
Guest





PostPosted: Thu Jan 31, 2008 8:59 pm    Post subject: hyundai hlt 3773 LCD stuck in standby Reply with quote

when i plug in the only voltage present is 3.6-4.2v standby ..when i have managed to get it to switch on all the voltages are ok.when it wont switch on i get 3.6-4.2v on standby,if i turn it on i get a quick flash of approx 2.6 v on the 'power on' terminal and then it pulses that same 2.6v every second...with the power on but the power board disconnected from the main boardi get 4.99 v on standby,is it normal for the voltage drop from 4.99 to 3.6-4.2(set in off state),thanks[/img]
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия