View previous topic :: View next topic |
Author |
Message |
wawi0069 Guest
|
Posted: Sun Apr 03, 2005 3:09 pm Post subject: charger |
|
|
does anyone know how to build a custom charger that can charge 4 AA NiMH battery in parallel sequence... thnx guys |
|
Back to top |
|
|
walter58
Joined: 11 Apr 2005 Posts: 20 Location: Antwerp,Belgium
|
Posted: Sun Apr 24, 2005 8:11 am Post subject: NiMh charger |
|
|
Hello,
I assume that you don't have the intension to load your cells at "quick rate", so let's say that you charge your cells with 0.1 X normal battery current, so in your case, with four cells in parallel, you can charge the batteries with 0.4 X nominal cell current (f.e. if your batteries are 3000maH types,you might charge your cells with 300mA per cell,so with four cells in parallel,your charger has a charge current of 1.2A).
However, most chargers expect the cells to be put in series...
Take a look on the internet at these sites :
http:<//www.electronics-lab.com/projects/power/037
this charger uses the great LM317 3 pins regulator !
http://www.discovercircuits.com/B/batt-chrg.htm
or type "NiMh charger schematics" or "battery charger schematics"
succes ! _________________ never give up when you are looking for something,unless you're forced to ! |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
PCZ0903046CE panasonic • dsd1406006ce panasonic • vl-wd250e Sharp • H500 ZENITH • khb9d0n90n1 KEC • DV-260-S Pioneer • MQMSH0011DG151214REV1 AX800 Series SOS O • PRX Series Interface PCB Parts List JBL • service Daewoo • PM300 pwr amp Carver •
|