View previous topic :: View next topic |
Author |
Message |
Lefteris Guest
|
Posted: Fri Mar 21, 2008 1:55 pm Post subject: Philips 28pt4503/15 (MD1.2E AA) Help! |
|
|
Hello,
First, sorry for my English if i do mistakes from now on...
This TV set is not mine, a friend gave to me for free, because he couldn't fix it.
He told me that he replaced the original LOT with HR-8116, but with no luck...
TV set was at protection mode (hick-up) with led flashing. I opened it and
C2433 (1,5nF/2KV) has burnt. I changed it with a 1,5nF/3KV capacitor, soldered
some dry-joints in Large Signal Panel and checked some LOT related components
(resistors/diodes).
Now when turning on, for 5 secs i hear tic-tic sound then i take black picture
with some blurry "ghost" colors, but with good sound from channels. The tic-tic
sound come from crt panel and i see from back, near G2 pin, a little "lightening".
If i adjust the LOT (Focus/Screen), tv screen goes white and flashing quickly,
adjust more has result to goes in stand-by and start-up with more tic-tic...
I enter in SDM Mode but no led blinking for error codes... I suspect two transistors
near C2433 which burnt, T7410 (BF819) and T7421 (BU1506DX). How can i check
these with multimeter?
Anything else to check it...
Thank you for your time,
Lefteris, Athens (Greece). |
|
Back to top |
|
|
Lefteris Guest
|
Posted: Sat Mar 22, 2008 3:33 pm Post subject: Philips 28pt4503/15 (MD1.2E AA) Help! |
|
|
Hello again,
I replaced BF819 and BU1506DX with BU1508DX, but nothing...
What else should i check?
In the store told me that maybe it's diode problem, but where...
in the high-voltage or in the power supply circuit? |
|
Back to top |
|
|
Guest
|
Posted: Mon Mar 24, 2008 11:53 am Post subject: |
|
|
do you check voltage on suply and RGB |
|
Back to top |
|
|
Lefteris Guest
|
Posted: Mon Mar 24, 2008 7:03 pm Post subject: |
|
|
Thanks for your reply,
Big Capacitor: 375V
Next Capacitor: 132V
In high-voltage:
L1 (VOS): 185V
L6 (VFRAME): 20V
RGB (if you mean in crt panel):
both 210V in collector of transistors...
*(measures in scart-mode without scart plug-in, black screen)
**For "ghost" colors that i said earlier, it's more than a blur (no focus) rainbow,
which is all over the screen, with picture of channel very very blur (hard-visible to see).
Sorry for my poor english, i don't know how to explain better. |
|
Back to top |
|
|
Lefteris Guest
|
Posted: Wed Mar 26, 2008 1:04 am Post subject: |
|
|
I don't know if it's very important (for my problem i mean), but i found in the SSP, a missing smd transistor (7693), which terminated in pin25(=0V) of the μP (7600). It's like removed and not dropped, but i'm not sure... I soldered some dry-joints in the SSP and i saw it.
Sould i continue to search in the SSP or this is a waste of time?
I'm not an expert with tv repairs and i need some help here, please... |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
PC800A & 1200A InterM • Схема POA-1500 DENON • HP COMPAQ PRESARIO CQ50 - WISTRON ASTROS • fdp8n50nzu fdpf8n50nzu Fairchild Semicon • Pye Q70 PYE (GB) • 2520 903 01B Keithley • AES-80 Assembler aes • PowerMac 7100 Apple • BX998A Philips • ME33 Boss •
|