View previous topic :: View next topic |
Author |
Message |
jmck100
Joined: 21 May 2008 Posts: 3
|
Posted: Wed May 21, 2008 8:28 pm Post subject: Electrohome 38K21ILC01 |
|
|
Any suggestions, the vertical field on this monitor is still reduced
after replacing the vertical IC (TDA1175M) and the caps at C341 and
C311.
Thanks, Joe. |
|
Back to top |
|
|
torbjorn
Joined: 07 Jun 2007 Posts: 370 Location: Sweden
|
Posted: Thu May 22, 2008 8:25 am Post subject: |
|
|
Check that the vertical deflection coils are in order - no shorted turns, if there are two coils in parallel, make sure that there is not a open circuit in one of them.
Also, check the supply voltage to the vertical output (usually about 30 V), and that any bootstrap/flyback circuit (usually, an electrolytic cap and a diode) works correctly.
If there is a small resistor (about 1 ohm) in series with the deflection coils, for current feedback, make sure that it has the correct value. |
|
Back to top |
|
|
jmck100
Joined: 21 May 2008 Posts: 3
|
Posted: Sun May 25, 2008 2:31 pm Post subject: |
|
|
torbjorn wrote: | Check that the vertical deflection coils are in order - no shorted turns, if there are two coils in parallel, make sure that there is not a open circuit in one of them.
Also, check the supply voltage to the vertical output (usually about 30 V), and that any bootstrap/flyback circuit (usually, an electrolytic cap and a diode) works correctly.
If there is a small resistor (about 1 ohm) in series with the deflection coils, for current feedback, make sure that it has the correct value. |
Thank you for your response. We checked the components you suggested, but found nothing that brings the deflection to where it is needed. We have been looking for the datasheet on the vertical IC (TDA1175M), and the schematic on the monitor, but have not been able to locate these documents. Do you have any of these documents to share? |
|
Back to top |
|
|
torbjorn
Joined: 07 Jun 2007 Posts: 370 Location: Sweden
|
Posted: Mon May 26, 2008 8:53 am Post subject: |
|
|
When making a google search for TDA1175, the very first hit was a link to a datasheet!
http://www.datasheetcatalog.org/datasheets/185/377998_DS.pdf
Probably, there are no electrical differences between the TDA1175P and -M , it is just a matter of different cases. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
p dn f panasonic • 421M 1C00 sch . Various • d7nm50n d7nm50n-1 f7nm50n p7nm50n ST • ELECRAFT KPA100 user revA . Various • 23A-650-654-660-664 funai • 2sc789 Inchange Semiconductor • Схема DN-C615 DENON • 2sk3541 Rohm • buv48 Motorola • •
|