View previous topic :: View next topic |
Author |
Message |
ccmica
Joined: 21 Sep 2008 Posts: 2
|
Posted: Sun Sep 21, 2008 7:39 am Post subject: JVC AV-28T67ske picture problem (colored circles) |
|
|
My JVC AV-28T67SKE when switched on the other day had large bright concentric colored circles all over the screen with their center in the middle of the screen.
When I unplugged the TV from the mains and waited for some time, the symptom disappeared.
Any clue was is happening?
Thanks. |
|
Back to top |
|
|
dallano
Joined: 30 Oct 2008 Posts: 4
|
Posted: Thu Oct 30, 2008 8:11 am Post subject: Color problem |
|
|
What happened is that your picture tube was magnetized. sometimes vacuming near the reciever or placing speakers on top of the reciever or near it will cause the Picture tube to magnetize. TVs have a built in "degaussing coil" when the TV is turned on, it will show a rainbow of colors. When you turned off the TV then turned it back on the degaussing coil demagnetized the picture tube. It will probably not happen again if you are careful not to place anything magnetic or vacume near the reciever. |
|
Back to top |
|
|
ccmica
Joined: 21 Sep 2008 Posts: 2
|
Posted: Thu Oct 30, 2008 6:00 pm Post subject: Color Problem |
|
|
Dallano
That explains everything. I usually leave the tv set on standby. Consequently by soft staring it no degaussing function is performed. It seems degausiing happens only on hard power on.
Thanks for your advice. |
|
Back to top |
|
|
dallano
Joined: 30 Oct 2008 Posts: 4
|
Posted: Thu Oct 30, 2008 9:39 pm Post subject: |
|
|
yes, i forgot to tell you that degaussing does not happen with using your remote. Thre is also a degaussing coil you can buy to demagnetize the reciever. You can buy it at radio shack or other store. But this days you don't need it. back in the day when color TV's were first manufactured, they were not solid state but used vaccume Tubes instead of transistors. TV repairmen would have to replace the tube and then demagnetize it. |
|
Back to top |
|
|
minnie
Joined: 18 Aug 2005 Posts: 2880 Location: Hell
|
Posted: Thu Oct 30, 2008 10:41 pm Post subject: |
|
|
Turning it on and off and letting it sit should do the trick. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
str-de335 se391 v323 panasonic • N5227-90108 Installation Notes 252C 4-Po • vector signal analyzer meas guide M9064A • KE-2700SDK 2700B 1700SDK 1700B 2730B 173 • Panel SHARP LQ121S1DG11 0 [DS] . Various • FRD3 Sansui • NL3406 Philips • HSU-12HD03R2 HAIER • [non-polar] NP Series Yihcon • nordmende transita automatic 9.105 a sm •
|