View previous topic :: View next topic |
Author |
Message |
ggoodall
Joined: 04 Nov 2008 Posts: 3
|
Posted: Tue Nov 04, 2008 8:11 pm Post subject: LCD Monitor Fix: Red/Green/Yellow bands/columns down screen |
|
|
I have a NEC MultiSync LCD1970NX that is functional, but has one inch bands of color tint on the left side of the screen. The left side of the screen has a one inch band of red tint, immediately to the right is a one inch band of green tint, and occasionally i get a one inch band of yellow to the right of the green.
I am somewhat skilled at troubleshooting electronics, and am comfortable with soldering circuit boards. Unfortunately I don’t have the knowledge of monitor circuitry to know where to start looking?
Any advice on where to look, or how to fix this would be greatly appreciated! |
|
Back to top |
|
|
minnie
Joined: 18 Aug 2005 Posts: 2880 Location: Hell
|
Posted: Tue Nov 04, 2008 9:07 pm Post subject: |
|
|
Bad panel or t-conn board. |
|
Back to top |
|
|
ggoodall
Joined: 04 Nov 2008 Posts: 3
|
Posted: Tue Nov 04, 2008 10:24 pm Post subject: Next steps |
|
|
Ok thanks....can you suggest next steps on how to make the repair?
Also, what is a t-conn board? |
|
Back to top |
|
|
minnie
Joined: 18 Aug 2005 Posts: 2880 Location: Hell
|
Posted: Tue Nov 04, 2008 10:49 pm Post subject: |
|
|
T=conn board does the timing. Get a service manual so you have the part numbers of the boards. |
|
Back to top |
|
|
ggoodall
Joined: 04 Nov 2008 Posts: 3
|
Posted: Tue Nov 04, 2008 11:32 pm Post subject: Service manual location |
|
|
thanks for your help, and sorry for being such a newbie!
Where can I find the service manual? Also, any advice on serching for one? I searched on this site and didnt find anything.
thanks again |
|
Back to top |
|
|
minnie
Joined: 18 Aug 2005 Posts: 2880 Location: Hell
|
|
Back to top |
|
|
Justmanuals
Joined: 21 Aug 2004 Posts: 1948
|
|
Back to top |
|
|
|
|