| View previous topic :: View next topic |
| Author |
Message |
shawn3091
Guest
|
 Posted: Wed Jan 28, 2009 6:53 pm Post subject: Acer Aspire 5002wlmi laptop |
 |
|
the laptop does nothing when i press the power button with just the battery in, but if i plug it in the battery light flashes orange and it does nothing else, i do not see anything burnt on the mainboard. has anyone ever had this problem or have any idea where to begin to try to fix it, i am not afraid to replace components/solder, i have nothing to lose  , schematic could be helpful  i cant find one anywhere, id appreciate any help |
|
| Back to top |
|
 |
Guest
|
| Posted: Wed Jan 28, 2009 7:23 pm Post subject: |
|
|
| anyone know how to test the voltage regulators on the board with a multimeter? |
|
| Back to top |
|
|
jts1957
Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away
|
| Posted: Wed Jan 28, 2009 8:59 pm Post subject: |
|
|
| How about with NO battery, just AC adaptor? |
|
| Back to top |
|
|
Guest
|
| Posted: Wed Jan 28, 2009 9:49 pm Post subject: |
|
|
same i press the power button and the battery light flashes about 8 times, and that is all it will do, i notice as soon as i press the power button ethernet lights light up for a second and then the battery light flashes, so i am thinking something on the board is not getting power that should be or a component is bad or shorted, but i cant seem to find anything  |
|
| Back to top |
|
|
PublicPirate
Joined: 17 Jan 2009
Posts: 1
|
| Posted: Wed Jan 28, 2009 10:18 pm Post subject: |
|
|
| Remove the memory and see whether it beeps RAM error code |
|
| Back to top |
|
|
Guest
|
| Posted: Wed Jan 28, 2009 10:23 pm Post subject: |
|
|
| everything is removed from it except the cpu |
|
| Back to top |
|
|
shawn3091
Guest
|
| Posted: Fri Jan 30, 2009 1:38 am Post subject: |
|
|
| anyone know where i can get a free schematic of the board? |
|
| Back to top |
|
|
Justmanuals
Joined: 21 Aug 2004
Posts: 1948
|
|
| Back to top |
|
|
shawn3091
Guest
|
| Posted: Fri Jan 30, 2009 4:19 am Post subject: |
|
|
| i have tested areas with a multimeter and it seems to be getting power everywhere, 3.3v, 5v and 18v at various places on the board, capacitors all look fine, so my guess is bad power ic, voltage regulator or sm fuse somewhere i have no idea |
|
| Back to top |
|
|
Jack Horner
Guest
|
| Posted: Fri Jan 30, 2009 4:34 am Post subject: |
|
|
[quote=" i have no idea[/quote]
yes, thats obvious |
|
| Back to top |
|
|
|
|
|
FAQ
