| View previous topic :: View next topic |
| Author |
Message |
VTSS
Joined: 22 Mar 2009
Posts: 6
|
|
| Back to top |
|
 |
Justmanuals
Joined: 21 Aug 2004
Posts: 1948
|
|
| Back to top |
|
|
VTSS
Joined: 22 Mar 2009
Posts: 6
|
 Posted: Sun Mar 22, 2009 4:11 am Post subject: |
 |
|
| It worked for me. It isn't a direct link but the download is legit. I have a copy on my PC if I could figure out how to upload it |
|
| Back to top |
|
|
VTSS
Joined: 22 Mar 2009
Posts: 6
|
| Posted: Sun Mar 22, 2009 4:29 am Post subject: |
|
|
| If nobody thinks the download is legit could someone at least PM me with their email address so I can send the copy of the service manual? |
|
| Back to top |
|
|
jts1957
Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away
|
| Posted: Sun Mar 22, 2009 4:58 am Post subject: |
|
|
That IS a good link to a download for that manual.
Anyway 5.6 volts source is available at Q804's Emitter and 12 volt source is available at Q800's Collector. |
|
| Back to top |
|
|
Justmanuals
Joined: 21 Aug 2004
Posts: 1948
|
|
| Back to top |
|
|
Guest
|
| Posted: Sun Mar 22, 2009 2:03 pm Post subject: |
|
|
| jts1957 wrote: | That IS a good link to a download for that manual.
Anyway 5.6 volts source is available at Q804's Emitter and 12 volt source is available at Q800's Collector. |
Perfect, thanks! |
|
| Back to top |
|
|
Guest
|
| Posted: Sun Mar 22, 2009 2:30 pm Post subject: |
|
|
| Does the Q804 or the Q800 have both + and - leads or should I wire the fan to the - ground on the chassis? |
|
| Back to top |
|
|
jts1957
Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away
|
| Posted: Sun Mar 22, 2009 4:16 pm Post subject: |
|
|
| Both points reference chassis ground. |
|
| Back to top |
|
|
Guest
|
| Posted: Mon Mar 23, 2009 4:20 am Post subject: |
|
|
| Wired fan to Q804, unit would not power on. I tested Q804 with a multimeter, it shows 5v when the amp is off. The fan needs 5v DC, any DC points anywhere? |
|
| Back to top |
|
|
|
|
|
FAQ
