electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
what will make a fuse blow on the power board for TV

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
cisco.tech



Joined: 05 Dec 2010
Posts: 3

PostPosted: Sun Dec 05, 2010 5:55 am    Post subject: what will make a fuse blow on the power board for TV Reply with quote

Hi
I have a Toshiba 42rv530u, It does not power up so I took the back off it.

I have downloaded a PDF that tells me to look for specific vdc on specific pins, this I have not done yet.

I am looking at it tonight with the magnify glass and see a fuse look funny, I checked with my fluke mm and it reads faulty. (the fuse) < bad.

Can I just buy a new fuse or would I need to verify what blew the fuse first?

thank you very much for any help.
Back to top
View user's profile Send private message
train123_not logged on
Guest





PostPosted: Tue Dec 07, 2010 4:03 pm    Post subject: Reply with quote

Well, it really depends on what section the fuse was attached to and how you want to tackle the repair.

There has been the rare case where just changing the fuse fixed the problem.
Typically all fuses are rated so that they will never will blow during normal operation conditions so something abnormal happened in your TV.
If the fuse blew because of a shorted part, your new fuse will blow again.
Back to top
cisco.tech



Joined: 05 Dec 2010
Posts: 3

PostPosted: Thu Dec 09, 2010 12:21 am    Post subject: Reply with quote

Thanks for replying

the board has 2 fuses: (typical glass removable).

1 is near the power Vac input jack, the other is the other side of the board.

If it is possible to buy just the schematic for the power supply and fix it I would choose that.

what do you think?

thank you
Back to top
View user's profile Send private message
cisco.tech



Joined: 05 Dec 2010
Posts: 3

PostPosted: Thu Dec 09, 2010 12:23 am    Post subject: Reply with quote

the far side fuse is bad the one by the Vac input is good
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия