| View previous topic :: View next topic |
| Author |
Message |
jeffsm7
Guest
|
 Posted: Sun Jul 03, 2005 5:59 am Post subject: Vestel 11AK45 programming |
 |
|
| How do I enter the programming mode in the 11AK45 chassis? I have a frame fault which I have determined is caused by a corrupted EEPROM. (I removed the EEPROM and get a full raster) I was hoping to reprogramme the existing EEPROM rather than have to replace it. - 2 week delivery, customer wants back in a couple of days!!!! Thanks Jeff |
|
| Back to top |
|
 |
tsgunnell
Joined: 03 Jun 2004
Posts: 49
Location: middx england
|
| Posted: Sun Jul 03, 2005 10:57 pm Post subject: |
|
|
this is for for the 11ak46
SERVICE MODE INSTALL.4725
this is for the 11ak37
SERVICE MODE (MENU THEN 4,7,2,5), |
|
| Back to top |
|
|
jeffsm7
Guest
|
| Posted: Tue Jul 05, 2005 6:13 am Post subject: |
|
|
| Many thanks for your help. Managed to obtain a picture after resetting height, but geometry for all formats out. JVC advised its a LONG process to reprogramme EEPROM and advise purchase of replacement which comes pre-programmed. Returned to customer pending chip arrival. Jeff |
|
| Back to top |
|
|
Guest
|
| Posted: Sat Nov 12, 2005 10:19 am Post subject: Re: Vestel 11AK45 programming |
|
|
| jeffsm7 wrote: | | How do I enter the programming mode in the 11AK45 chassis? I have a frame fault which I have determined is caused by a corrupted EEPROM. (I removed the EEPROM and get a full raster) I was hoping to reprogramme the existing EEPROM rather than have to replace it. - 2 week delivery, customer wants back in a couple of days!!!! Thanks Jeff | |
|
| Back to top |
|
|
hmhmhmh
Guest
|
| Posted: Tue Sep 18, 2007 10:09 am Post subject: vestel |
|
|
hello, problem for vestel tv
what about for hot tranzestor(bu808dfi) ?
tanks |
|
| Back to top |
|
|
|
|
|
FAQ
