JVC GM-V42UG plasma monitor problem

[tac440]

I have two of these TV's with the same problem. The TV's I have will run fine for about an hour then the picture starts going crazy. I appreciate the cap tip because both sets have the same bulging tops and that was going to be my next purchase.

[CapZ]

Yes vtech is right. The bulge on those caps are normal. I cut the insulation and the metal underneath is flat and intact. So I resoldered new caps and the picture is the same. Below is a picture of the screen. Any idea which board is the most likely culprit?

[img]http://images1e.snapfish.com/232323232%7Ffp8%3A8%3Evq%3D323%3B%3E3%3C%3A%3E%3B44%3EWSNRCG%3D328%3B%3A79762339vq0mrj[/img]

[CapZ]

well that didn't work. What happened? bbcode is on.

[CapZ]

Here's a larger pic if someone wants to copy and paste and have a look. Thanks

[img]http://images1f.snapfish.com/232323232%7Ffp935%3Enu%3D323%3B%3E3%3C%3A%3E%3B44%3EWSNRCG%3D328%3B%3A79762339nu0mrj[/img]

[CapZ]

Also the lines at the top is normal. That's an old vcr on pause

[CapZ]

Anyone?