View previous topic :: View next topic |
Author |
Message |
newcoppiceman
Joined: 15 Jun 2009 Posts: 13 Location: Woking, Surrey UK
|
Posted: Wed Aug 26, 2009 2:01 am Post subject: Fix for Panasonic NV-HS950B and other VCRs using K-Mechanism |
|
|
Reverse picture search can develop a noise bar at the top of screen, perhaps ok at the very end of a tape but getting progressively worse as you work back through the tape to the start.
Inspection of the tape path will reveal very lacklustre tape tension with poor contact with the video head drum on the entrance side (although in this mode the tape is exiting from this side of the drum, of course).
To fix this, change the clutch assembly, part # VXP1409. There's loads of free K-mechanism service data to be found on the 'net, the mechanism comes out very easily and you only need to slip the belt off to replace the part. A new one costs about 10 GBP. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
36680001 AI Loewe FSM 7 17 02 01 Loewe • s dn 06 panasonic • IIMUS21DTNLONO-slim IMPERIAL • irfd110pbf International Rectifier • SAFAR 73 AF and Power Supply Unit SAFAR • 74ls20 datasheets • 12924-60001 CardRdrIntf HP • PM-15S1 Marantz • 2sb1215 2sd1815 Sanyo • ZK-147 Unitra •
|