View previous topic :: View next topic |
Author |
Message |
Hitachi43fdx10b Guest
|
Posted: Wed Aug 19, 2009 12:21 am Post subject: Convergence problem |
|
|
I have a convergence problem before and I replaced both cirucit stk392-120. After I replaced I do not have video and audio . Any suggestions I am good soldering and I can read the multimeter but I am not good reading circuit. i think one capacitor or one circuit regulator died but I do not which one
Thank you |
|
Back to top |
|
|
jts1957
Joined: 24 Nov 2008 Posts: 2476 Location: Far, Far Away
|
Posted: Wed Aug 19, 2009 3:18 am Post subject: |
|
|
Just to make sure we're understanding each other...
Set had convergence symptoms (but was working);
You replaced STK's;
Set now doesn't work (No Video/No Audio)?
If I have it right, there must be a connection. You unknowingly may have done something that's causing the set not to work. A solder bridge or splash (can happen to the best of us), unplugged/loose connectors, bent one part lead so its touching another's lead, etc.
Of course, as you say, another part may have failed coincidentally. |
|
Back to top |
|
|
Hitachi43fdx10b Guest
|
Posted: Wed Aug 19, 2009 5:16 am Post subject: convergence problem |
|
|
Thank you for the response
Like you said It was working before I was missing the green color (misalignment). I changed the ic twice the first time I changed with an equivalent circuit. and I have the problem and I replace with the original number. I checked today and I found a resistance with a broken ceramic, but it is reading resistance 2.7 kohms (rk05). |
|
Back to top |
|
|
plcnut
Joined: 18 Aug 2009 Posts: 6 Location: Missouri, U.S.A.
|
Posted: Wed Aug 19, 2009 5:28 am Post subject: |
|
|
check the little led lights on your power board. are all of them coming on, and is the red one flashing? when you power the set up which light turns off first? this will tell which circuit is causing the problem. Regards, Jason |
|
Back to top |
|
|
Hitachi43fdx10b Guest
|
Posted: Fri Aug 21, 2009 12:05 am Post subject: convergence problem |
|
|
Hi I checked the board and I found a resistance open rk58 3.3 ohms I need to replaced, so after that i wil let you know. Thank you |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
CA-224 & 1224 Fisher • -TV-A149 AIWA • AVR-2307.part4 DENON • STR-DE135 panasonic • tx91 thomson • SGH-R225 service manual Samsung • GDZ SMD • ARU-HF70 Field Dental X-Ray - Maintenanc • FS-1370DN-SM-Rev4 Kyocera • irf9z34s International Rectifier •
|