Inadequate e-w correction F19 chassis (Goodmans W322NS)

[gary_esi]

The S-correction capacitor had blown, now replaced and all seems fine except for the e-w correction. Initially no difference between "Standard" and "Reduced" aspect ratio modes, but that's now effective after tweaking e-w correction to zero in service mode.

However, the adjustment is not sufficient to ocrrect it fully. Any advice welcome

[picasso]

Hi Gary,


Check D27 , L604 (15mH) , R82 and R83


Good luck ,
Picasso

[gary_esi]

Will do, thanks