electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Dell Inspiron 1150 Motherboard Circuit Layout

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Computer and office equipment repairs
View previous topic :: View next topic  
Author Message
Guest






PostPosted: Tue Nov 25, 2008 4:17 pm    Post subject: Dell Inspiron 1150 Motherboard Circuit Layout Reply with quote

I have just replaced the power jack connection on my laptop due to false contact or cold weld. Seems the sawder will not make contact to the eroded board connection. I was looking for a circuit board layout or blueprint so that I can sawder a wire and jump it to the next good connection. Can anyone help?
Back to top
Justmanuals



Joined: 21 Aug 2004
Posts: 1949

PostPosted: Tue Nov 25, 2008 5:59 pm    Post subject: Reply with quote

I already answered this post on the other forum. See that.
_________________
Want To Fix Something?
http://www.manuals4you.com

Need a manual now? Instant Download
http://www.justmanuals.com
Back to top
View user's profile Send private message Send e-mail
Billy Mays
Guest





PostPosted: Thu Oct 08, 2009 2:19 am    Post subject: Not Helpful Reply with quote

I understand that people are encouraged or rather expected to conduct a search of the forums for the answer first, but there's no reason to be a jerk about it. Good job being a snarky toolbag.
Back to top
Justmanuals



Joined: 21 Aug 2004
Posts: 1949

PostPosted: Fri Oct 09, 2009 3:59 am    Post subject: Reply with quote

You're a day late and a buck short Billy Mays. Besides you're dead too.
Why should I have to post multiple answers because the original poster posted in multiple places?
Back to top
View user's profile Send private message Send e-mail
jts1957



Joined: 24 Nov 2008
Posts: 2472
Location: Far, Far Away

PostPosted: Fri Oct 09, 2009 5:01 am    Post subject: Reply with quote

Sham-on. Laughing
_________________
You're over there, I'm over here.
Back to top
View user's profile Send private message
cnfix



Joined: 15 Sep 2009
Posts: 2

PostPosted: Mon Oct 12, 2009 1:06 am    Post subject: Reply with quote

here it is, DELL Inspiron 1150 schematic diagram: http://www.laptopschematic.com/dell-inspiron-1150-schematic-diagram/ , but not free, 5.5$
_________________
laptop service manuals and schematic diagrams download
Back to top
View user's profile Send private message
ab8ru



Joined: 22 Oct 2009
Posts: 8

PostPosted: Thu Oct 22, 2009 12:31 pm    Post subject: Re: Dell Inspiron 1150 Motherboard Circuit Layout Reply with quote

Anonymous wrote:
I have just replaced the power jack connection on my laptop due to false contact or cold weld. Seems the sawder will not make contact to the eroded board connection. I was looking for a circuit board layout or blueprint so that I can sawder a wire and jump it to the next good connection. Can anyone help?


Mind if I ask what kind of solder you are using Question

I know from experience that there is some really poor cheap solder that does a poor job, and definitely do not use acid core solder it will eat away at your repair job, I will reccomend that you use a rosin core and one company makes a very good 5 core solder.

Also invest in some flux paste . I know a supplier that is retail and I never had any trouble with theirs, but a Pro company has a Brand called Kester and ther are several suppliers out there.

Also are you using a good quality soldering iron Question

Ill give you a quick list


Weller

Whal

Ungar

there may be others also check the tip if its not dirty .

BTW for everyone reading this post.. Advice do not attempt to repair a MOBO ( MOther BOard ) they are layered and if you do not have the right equiptment to begin with and its ofter better just to replace the MOBO compleatley (sic) they are layered like a sandwich, and solder does not go where its intended, and will cause problems.
_________________
AB8RU Extra Class Ham
Electronics School IT FCC License P3-18-86210
Membership IEEE & ISCET, ARRL Life Member
Acredited Ham V.E.

Want to be a Electronics Engineer ?
Back to top
View user's profile Send private message
FalconFour



Joined: 22 Nov 2009
Posts: 35
Location: Fresno, CA

PostPosted: Sun Nov 22, 2009 10:17 am    Post subject: Reply with quote

Justmanuals wrote:
You're a day late and a buck short Billy Mays. Besides you're dead too.
Why should I have to post multiple answers because the original poster posted in multiple places?

Perhaps, then, you should have flagged this topic for deletion to begin with. It would appear that the person whom you're responding to actually found this topic via searching, and at the time, only found a dead-end at "I answered this in the other topic" - with no link to the other topic. There would be no way to look for "the other topic" if this was the only one that turned up a result.

Just sayin' - if you're referring to "the other post", you can probably save a hundred people a good amount of frustration by just posting a link to the other topic instead of filling that link space with how annoyed you are with duplicate posts. Wink
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Computer and office equipment repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Електроника София - Service Manuals Free Download - Prikachi - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Search - Jabse.InK  - Pulsator

Connector Pinout Forum - Новини - SnimkiOt.com - безплатен DNS - Whois разузнаване - Poblizo.com : пътешествия