View previous topic :: View next topic |
Author |
Message |
pfm
Joined: 27 Nov 2009 Posts: 1 Location: USA
|
Posted: Fri Nov 27, 2009 1:59 pm Post subject: Toshiba 34HF85, M3U01T Chassis |
|
|
This is a large CRT set assembled in 2005 which recently suffered a power surge. The set switches on, produces a raster for a few seconds and shuts down.
The B+ is generated from an SMPS. The B+ is fed back to provide the reference voltage to a shunt regulator which controls an optoisolator. The opto circuit can turn off the switching transistor in the primary winding. The opto and 431 shunt regulator check OK.
This appears to be some type of SOPS.
The B+ OC (LOPT disconnected) is 139V with the supply making a hum at 595Hz (The trouble and strife has perfect pitch). With a light bulb as a load in place of the LOPT and HOT, the supply groans and shuts down.
Can anyone throw any light on how the frequency is controlled?
Thanks
Pfm |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
DELL-LCD-TV-POWER-W2607C (1) Dell • GDM-400PS Sony • N4392-91011 Getting started guide for th • SAFAR 2846 SAFAR • GC34-0132-0 FORTRAN IV Introduction Feb7 • CX902 . Various • Panel SAMSUNG LTI820HT-L01 0 [DS] . Vari • CH480 2 LG • ctv-2012, 2102 . Various • service Philips •
|