electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Toshiba 34HF85, M3U01T Chassis

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
pfm



Joined: 27 Nov 2009
Posts: 1
Location: USA

PostPosted: Fri Nov 27, 2009 1:59 pm    Post subject: Toshiba 34HF85, M3U01T Chassis Reply with quote

This is a large CRT set assembled in 2005 which recently suffered a power surge. The set switches on, produces a raster for a few seconds and shuts down.

The B+ is generated from an SMPS. The B+ is fed back to provide the reference voltage to a shunt regulator which controls an optoisolator. The opto circuit can turn off the switching transistor in the primary winding. The opto and 431 shunt regulator check OK.

This appears to be some type of SOPS.

The B+ OC (LOPT disconnected) is 139V with the supply making a hum at 595Hz (The trouble and strife has perfect pitch). With a light bulb as a load in place of the LOPT and HOT, the supply groans and shuts down.

Can anyone throw any light on how the frequency is controlled?

Thanks
Pfm
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Електроника София - Service Manuals Free Download - Prikachi - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Search - Jabse.InK  - Pulsator

Connector Pinout Forum - Новини - SnimkiOt.com - безплатен DNS - Whois разузнаване - Poblizo.com : пътешествия