View previous topic :: View next topic |
Author |
Message |
jts1957
Joined: 24 Nov 2008 Posts: 2476 Location: Far, Far Away
|
Posted: Thu Nov 18, 2010 5:55 am Post subject: |
|
|
Zener 6079 (9.1V) is shorted. R3045 measures 1.8 ohms.
If anyone else needs to know in the future, 3043 on power supply is actually a surface mount jumper. You can use a resistor in its place not to exceed .05 ohm. This connects to the cathode D6079 a 9.1 Zener. You will not find ether component on any prints for this model. _________________ You're over there, I'm over here. |
|
Back to top |
|
|
Jakeklem
Joined: 17 Nov 2010 Posts: 4
|
Posted: Sat Nov 20, 2010 2:13 am Post subject: |
|
|
jts1957 wrote: | Zener 6079 (9.1V) is shorted. R3045 measures 1.8 ohms.
If anyone else needs to know in the future, 3043 on power supply is actually a surface mount jumper. You can use a resistor in its place not to exceed .05 ohm. This connects to the cathode D6079 a 9.1 Zener. You will not find ether component on any prints for this model. |
Thank you very much for the information. I'm a little confused about what you said though. I'm having trouble finding 3043, did you mean 3045 is a surface mount jumper? |
|
Back to top |
|
|
jts1957
Joined: 24 Nov 2008 Posts: 2476 Location: Far, Far Away
|
Posted: Sat Nov 20, 2010 3:07 am Post subject: |
|
|
I suspect both are surface mount jumpers. _________________ You're over there, I'm over here. |
|
Back to top |
|
|
sixpax Guest
|
Posted: Sun Nov 28, 2010 12:30 am Post subject: |
|
|
Jakeklem wrote: | S8ER01Z wrote: | Same issue here...replaced 2074 and diode at 6079 but 3045 appears to be damaged.
Anyone know what should be there? It appears melted and I can't read it anymore. |
I'm interested in this information too. What is the replacement part we need for 3045? Also, thanks for the 6079 part number. Hopefully I can have this thing up and running again soon. |
6079 is just outside of the 2074 cap, one end of it goes right next to the #1 pin of the cable pn in the corner. 3045 is on the underside of the board and seems to be connected to the one lead of the 6079 diode. I accidentally fried the 3045 part and I just used solder to replace it and my tv works fine now. |
|
Back to top |
|
|
Jakeklem
Joined: 17 Nov 2010 Posts: 4
|
Posted: Fri Dec 03, 2010 11:59 pm Post subject: still no luck |
|
|
I finally got around to soldering a new zener diode in, but the tv is still dead. I'm thinking the main board is shot too. I took the heatsink off and saw discoloration all over the board. Does anyone have a source for a new main board at a reasonable price? |
|
Back to top |
|
|
Magnafux Guest
|
Posted: Tue Jan 18, 2011 2:26 pm Post subject: Help with 37MF23ID/37 |
|
|
I just received a busted 37MF23ID/37 lcd and I have an issue. Someone has been working on the power supply before and, removed a few components. Here are the numbers for their locations 2081-83, 2074-75 (they are all caps I presume), 7072-73, 7061-62. If you can tell me the values of the capacitors that would be great and for the components just let me know the part numbers. I'm baffled as to why all these components are missing, other than the capacitors. |
|
Back to top |
|
|
Preher-Tech Guest
|
Posted: Tue Jun 14, 2011 8:42 pm Post subject: |
|
|
3045 is a 2.2 ohm 0.125W resistor |
|
Back to top |
|
|
Guest
|
Posted: Sun Jun 26, 2011 6:07 am Post subject: |
|
|
I am also trying to figure what the component at 3045 is . Can any one help with a link to a schematic? Or component value? [email protected]
Thank you. |
|
Back to top |
|
|
|
|