View previous topic :: View next topic |
Author |
Message |
Willem
Joined: 08 Oct 2004 Posts: 1 Location: the Netherlands
|
Posted: Sun Jan 10, 2010 9:47 pm Post subject: Command codes Relisys plasma |
|
|
I have a Relisys plasma 42", type RP42AB20(S)
It had very dark picture so I replaced the Z sustain board.
After that it worked again.
The problem I have now is that the remote control is not working.
I checked the hardware, followed the signal to the processor, and that is ok. This set has a serial RS232 connector.
With the terminal program Docklight I can communicate with the set.
This plasma is about the same as a philips BDS4241.
In the philips manual there is a command to switch the remote off and on.
When I try this the set does not reply with ACK.
The serial commands however are different so it seems.
Does anyone has the correct serial command code for this plasma.
willem |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
[bi-polar radial] RNL Series Richey • AZS218 sm cz TESLA • RT9248 Various • hgtg12n60a4d hgtp12n60a4d hgt1s12n60a4d • huvid s1 panasonic • P992 Dell • wave panasonic • ECS I4XIXX - REV 0.2 ECS • Philco 1008 Unica • hfe model 1260 s216 schematic GRADIENT •
|