electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Samsung HP-R4252 Plasma - Red Lines/Blotches
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
Tushy



Joined: 12 Sep 2008
Posts: 5

PostPosted: Sun Jun 28, 2009 9:05 pm    Post subject: Samsung HP-R4252 Plasma - Red Lines/Blotches Reply with quote

I've got a 42" Samsung HP-R4252 that has red lines in all inputs and the menu screen.

Anyone have any ideas as to what may be wrong?




Back to top
View user's profile Send private message
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Mon Jun 29, 2009 2:02 am    Post subject: Reply with quote

I'd say Y sustain and Y driver boards need to be replaced. You need to check the VS and VA voltage along with the vset.
Back to top
View user's profile Send private message Send e-mail
Tushy



Joined: 12 Sep 2008
Posts: 5

PostPosted: Thu Jul 02, 2009 2:39 am    Post subject: Reply with quote

Hi minnie and thanks for the reply.

Is there any way to determine if it's the Y sustain or the Y buffers?

When I mess with each of the pots on the Ysus it does affect the picture. Not sure if this means it's functioning or not.

Thanks!
Back to top
View user's profile Send private message
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Fri Jul 03, 2009 3:19 am    Post subject: Reply with quote

Anonymous wrote:
No.
yes this was me
Back to top
View user's profile Send private message Send e-mail
fmcvett



Joined: 13 Jul 2009
Posts: 3

PostPosted: Mon Jul 13, 2009 7:49 pm    Post subject: Same problem but, Reply with quote

Same problem to start with but now has NO picture with sound. Could it be one or both of the boards?
Back to top
View user's profile Send private message
VC
Guest





PostPosted: Sun Dec 06, 2009 4:50 pm    Post subject: HP-R4252 looks like yours Reply with quote

I just had my HP-R4252 repaired on 12.05.09 and it looked exactly like these photos. The picture is covered in horizonal, broken lines and the color is predominately red. They lines are grouped together in large bands across the screen.

The tech replaced the Y-Buffer boards (Up) and (Low) in about 20 minutes.

Samsung BN96-02034A BOARD, Y BUFFER UPPER ASSY
Samsung BN96-02216A BOARD, Y LOWER BUFFER ASSY
Back to top
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Mon Dec 07, 2009 2:58 am    Post subject: Re: HP-R4252 looks like yours Reply with quote

Sounds about right, how much did they charge?

VC wrote:
I just had my HP-R4252 repaired on 12.05.09 and it looked exactly like these photos. The picture is covered in horizonal, broken lines and the color is predominately red. They lines are grouped together in large bands across the screen.

The tech replaced the Y-Buffer boards (Up) and (Low) in about 20 minutes.

Samsung BN96-02034A BOARD, Y BUFFER UPPER ASSY
Samsung BN96-02216A BOARD, Y LOWER BUFFER ASSY
Back to top
View user's profile Send private message Send e-mail
vc
Guest





PostPosted: Fri Dec 11, 2009 2:47 am    Post subject: Re: HP-R4252 looks like yours Reply with quote

Samsung actually extended my warranty to cover the cost of parts and labor. It was because there was a mix up with Samsung and the repair shop that was supposed to evaluate my TV. I complained to Samsung but wasn't expecting too much because I was out of warranty. However, Samsung paid for the repair because of the inconvenience. I was surprised and pleased that they offered that to me.
Back to top
cosmikj
Guest





PostPosted: Sat Dec 26, 2009 6:50 am    Post subject: Reply with quote

i also have this problem. i got this tv for free and was curious how much it would cost to have these replaced, or is this basically just a paperweight now.
also, if anyone could link me to some tech info to read up on this further.

thanks for any info
Back to top
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Sun Dec 27, 2009 3:46 am    Post subject: Reply with quote

cosmikj wrote:
i also have this problem. i got this tv for free and was curious how much it would cost to have these replaced, or is this basically just a paperweight now.
also, if anyone could link me to some tech info to read up on this further.

thanks for any info


Did you try googleing the part numbers for the upper and lower drive boards?
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия