View previous topic :: View next topic |
Author |
Message |
Xtech Guest
|
Posted: Thu Jun 03, 2010 11:03 pm Post subject: Sony KV-FV300 TV not starting |
|
|
Hello,
I am working with a Sony TV Model KV-FV300 (BA6 chassis). When I press the the power button RY600 will engage for about 10 seconds (no high voltage) then disengage and start flashing 4 times. I tried replacing the vertical chip with no success. I started checking voltages and discovered that there is no voltage at any of the pins of the flyback including B+. Found that the 135V B+ was dead all the way though and including the secondaries at T603 in the power supply. I also checked the voltage at the pins of power supply IC600 (MCZ3001D). Voltage was present but the readings were low. For example the service manual shows that there should be 150 volts or more at several of the pins but I'm only getting between 130 and 135.
Any Help appreciated
Thanks |
|
Back to top |
|
|
Justmanuals
Joined: 21 Aug 2004 Posts: 1948
|
|
Back to top |
|
|
Guest
|
Posted: Fri Jun 04, 2010 12:52 am Post subject: |
|
|
I already have the manual,
That's where I found out what the voltages are supposed to be. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
2sb689 NO • hfe aiwa hs-p08 g08 g500 service en AIWA • RR-630CD & 660CD Ver 2 Grundig • OB510 mri HP • p sd panasonic • Summary of Smalltalk Message Forms and I • 8753E User Agilent • 2302RevA DocSpec Keithley • 2sa1969 Sanyo • 2sd1170 Inchange Semiconductor •
|