electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
symphonic tv help
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
coryking
Guest





PostPosted: Fri Aug 20, 2010 7:27 pm    Post subject: symphonic tv help Reply with quote

i have a symphonic LCD color tv model WF15L5 the backlight comes on but doesnt brighten up the screen and has poor luminessence
any help?
Back to top
jts1957



Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away

PostPosted: Fri Aug 20, 2010 7:35 pm    Post subject: Reply with quote

Unit will power on and show a picture but it is negative. The circuit board at the top of the screen is marked UD150XD and Q201 is a 6 legged ic that is a lump of ash (crispy critter).
_________________
You're over there, I'm over here.
Back to top
View user's profile Send private message
coryking
Guest





PostPosted: Mon Aug 23, 2010 6:57 pm    Post subject: fix? Reply with quote

where can i find a new ic chip? any websites?
Back to top
The_AntiRAM
Guest





PostPosted: Mon Aug 23, 2010 7:19 pm    Post subject: Re: fix? Reply with quote

coryking wrote:
where can i find a new ic chip? any websites?




You need to change the complete UD150XD T-Con Board not only the "chip".

Search Gooooooooooogle you will find somewhat.
Back to top
jts1957



Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away

PostPosted: Mon Aug 23, 2010 7:38 pm    Post subject: Reply with quote

(Thanks to Kenny B)

Q201 is a 1MZ4T108 is a 4.4 volt switching array consisting of one PNP and NPN transistor. It is driven by IC201. Q201 is sourced from the 10.9vdc line.

Having said that, Q201 controls the 4.4 volt line to the LCD panel which, if it is a crispy critter, doesn't bode well for the set. However you might get lucky and find C260 or C259 shorted. If one of them is shorted you may also have IC201 shorted/toasted etc. (A TL3472CDR op amp). Otherwise you MAY be looking at a panel. The output from Q201 goes to connector 312, pins 3,4 and 35...

Hope that may help you out a bit...
_________________
You're over there, I'm over here.
Back to top
View user's profile Send private message
coryking
Guest





PostPosted: Mon Aug 23, 2010 7:46 pm    Post subject: buy? Reply with quote

is ther a website where i can guy one or a store or anything?
Back to top
jts1957



Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away

PostPosted: Mon Aug 23, 2010 7:56 pm    Post subject: Reply with quote

Google number in question. Other than that...
Large parts suppliers: Mouser, Digikey, MCM Electronics.
_________________
You're over there, I'm over here.
Back to top
View user's profile Send private message
coryking
Guest





PostPosted: Tue Aug 24, 2010 7:05 pm    Post subject: ic chip Reply with quote

there is a six legged ic chip on the board what ic chip is that its apparently common that it fries i have the equipment to fix it i just need to know the part number so i can find one
Back to top
jts1957



Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away

PostPosted: Tue Aug 24, 2010 7:31 pm    Post subject: Reply with quote

jts1957 wrote:
(Thanks to Kenny B)

Q201 is a 1MZ4T108 is a 4.4 volt switching array consisting of one PNP and NPN transistor. It is driven by IC201. Q201 is sourced from the 10.9vdc line.

Having said that, Q201 controls the 4.4 volt line to the LCD panel which, if it is a crispy critter, doesn't bode well for the set. However you might get lucky and find C260 or C259 shorted. If one of them is shorted you may also have IC201 shorted/toasted etc. (A TL3472CDR op amp). Otherwise you MAY be looking at a panel. The output from Q201 goes to connector 312, pins 3,4 and 35...

Hope that may help you out a bit...

_________________
You're over there, I'm over here.
Back to top
View user's profile Send private message
coryking
Guest





PostPosted: Wed Aug 25, 2010 5:46 pm    Post subject: ic chip Reply with quote

i tried that one its an eight leg ic chip i need a six leg one its a bit smaller than the 201 that your talking about any ideas on a part number? or maybe what ic it is?
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия