View previous topic :: View next topic |
Author |
Message |
chancerocks Guest
|
Posted: Wed Feb 26, 2020 7:58 pm Post subject: mystery of Samsung UN40EH5000FXZA tv |
|
|
any help is greatly appreciated. My Samsung UN40EH5000FXZA tv went black... i replaced power board- nothing. Replaced main board- it turned on and worked.. for about 5 minutes before going black again. anyone have any idea of what the problem could be? thank you in advance |
|
Back to top |
|
|
jts1957
Joined: 24 Nov 2008 Posts: 2476 Location: Far, Far Away
|
Posted: Sat Feb 29, 2020 5:22 pm Post subject: |
|
|
And tho it's been said many times many ways ... BAD BULB(S). _________________ You're over there, I'm over here. |
|
Back to top |
|
|
chancerocks Guest
|
Posted: Wed Mar 04, 2020 6:44 pm Post subject: re: mystery of Samsung UN40EH5000FXZA tv |
|
|
thank you for your reply. i have since replaced the power board on the tv, and frustratingly now i have backlights, but no picture.
as always any advice is greatly appreciated. |
|
Back to top |
|
|
chancerocks Guest
|
Posted: Fri Mar 06, 2020 8:35 pm Post subject: |
|
|
sorry i meant to say i replaced the tcon board. So I have replaced the power board, the main board, and the tcon board (all at the same time, all new boards). The current status of the tv is that it has a black screen, but when plugged into the power outlet and i disconnect the power board from the main board, the back lights all come on strongly. Black screen when power board and main board are connected, and nothing happens when I press the power button.
Thank you for any ideas! |
|
Back to top |
|
|
jts1957
Joined: 24 Nov 2008 Posts: 2476 Location: Far, Far Away
|
Posted: Fri Mar 06, 2020 10:27 pm Post subject: |
|
|
Quote: | (all at the same time, all new boards) |
All boards 'New ... to you.'
See if remote sensor has 3.3/5V. If NO, Main board still bad/bad again. _________________ You're over there, I'm over here. |
|
Back to top |
|
|
|
|