LT26M1CA

[Geoff Scott]

Any help would be appreciated on a BUsh LT26MC1A with a 715T2907-2 psu.

The set responds to remote or manual switch on IE The standby light switches from red to blue and that's it, no backlight no sound. I have to switch off at mains to get back to standby.

Upon inspection I found the 12v reg IC had failed. After extensive searching I obtained and fitted a new one which has got the 12v back up but the set behaves the same. I'm thinking eeprom corruption. Any thoughts?

Cheers
Geoff