Samsung Plasma HP-R4272 Problem Black Vertical Bar

[cheebster]

Hello. I have a problem with a samsung hp-r4272 plasma. I attached a picture of the symptom. Could it be the zsus board ? I'm not sure if i could fix this one or if it's not worth it at all.

Thanks for any help !!!

[gary]

definetly not the z sus board, either the buffer board at the bottom of the pdp or more likely the pdp itself

[cheebster]

Hello ! Thanks for the reply.

I see a post here :

http://www.tv-forums.com/cgi-bin/gforum.cgi?post=68037;search_string=hp-r4252;guest=26574251#68037

From this guy reply he says,if i change the picture mode from 16:9 to 4:3 and the bar stays at the same position it means the plasma panel itself is shot.

Any way to confirm this ? If it's the case, unit going to recycling.

Thanks !!!!

[jts1957]

YOU could always try changing YOUR sets aspect ratio and see if it does or does not affect the bars position.
_________________
You're over there, I'm over here.

[cheebster]

That's what i did, and no, it doesn't affect the bar's position. Unit's gone to recycling now Sad, was 3000$ back in december 2005.

[minnie]

You could try the bottom buffer board first. They're pretty cheep.