electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
TDA8174A lowers imput impedance suddenly ?

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
TVrepairamateur



Joined: 22 Jan 2006
Posts: 2

PostPosted: Sun Jan 22, 2006 10:27 pm    Post subject: TDA8174A lowers imput impedance suddenly ? Reply with quote

Hi,
I have a TDA8174A as vertical amplifier. The vertical trigger pulse from the TV processor is in good shape - but sometimes the output 1 of the TDA8174A looses signal and goes to Ground. Interestingly the normally 5.5 Volt trigger signal on the trigger input (3) falls to a 1.5 Volt p-p signal althrough the video processor output is still 5.5 Vpp. The 4.7K resistor between Video processor and TDA8174A now causes the drop by 4 Volts. Before the same resistor has a drop by about 1 volt only. There is very little info on the TDA8174A - what causes the impedance of input 3 to become suddenly so low ? This is already the second TDA8174A I try - with the same effect. Who knows why this happens?

Many thanks !
Back to top
View user's profile Send private message
R_ay
Guest





PostPosted: Mon Jan 23, 2006 11:14 am    Post subject: Reply with quote

If nothing is wrong with the IC, based on your description, sounds like the IC is triggered in to shuttdown/protect mode. Provided there is no problem with it's DC supply &/or peripherals bad conn/etc, you may have problem in the final(yoke) stage or even in the feedback line. (pin 9)

http://www.st.com/stonline/products/literature/ds/9776.pdf
Back to top
Guest






PostPosted: Mon Jan 30, 2006 12:57 am    Post subject: Reply with quote

Thanks R-Ay,
Indeed, my yoke had ittermiting contacts - resoldered the thing and now it works again...
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия