| View previous topic :: View next topic |
| Author |
Message |
peter_ling
Joined: 12 Oct 2012
Posts: 3
Location: suffolk
|
 Posted: Fri Oct 12, 2012 5:54 pm Post subject: viewsonic vs12107 circuitdiagram |
 |
|
I have a VS12107 Veiwsonic monitor that users an emax pwr0502204001 inverter board. The bridge rectifier failed and the chopper control chip I have replaced them but the monitor fails to work. I have the 5v rail and the 12v rail but the 12-v rail cannot source enough current to power the backlights. The screen keeps flashing and when trying the 12v rail falls. I have injected 12v from by bench PSU and all is fine with the monitor. I have looked at the feedback loop for the PSU and it seems to be trying to control the pulse width. I am now wondering if I have the correct version of the chip as the numbers on the one I removed where nor very good. I would really like a circuit diagram or if any one has the chip number for this board it would also be good
Cheers
Peter
_________________
Peter |
|
| Back to top |
|
 |
jts1957
Joined: 24 Nov 2008
Posts: 2475
Location: Far, Far Away
|
|
| Back to top |
|
|
peter_ling
Joined: 12 Oct 2012
Posts: 3
Location: suffolk
|
| Posted: Mon Oct 15, 2012 7:18 pm Post subject: PWR0502204001 |
|
|
Thanks for the link it is a very good source for manuals. The viewsonic manual for the Q2202WB gives the schematic for the PWR0502204001 PCB but it does not list part numbers. I really need to now the part number of the chopper drive chip listed on the schematic, as PU1 if any one could help this would be really good.
Regards
Peter
_________________
Peter |
|
| Back to top |
|
|
peter_ling
Joined: 12 Oct 2012
Posts: 3
Location: suffolk
|
| Posted: Fri Oct 19, 2012 7:53 am Post subject: PWR0502204001 |
|
|
Hi
This is very frustrating as the power supply is relatively straight forward in its design so not being able to put my finger on the problem I am looking at what I have done as the chip PU1 was not very easy to read I may have got the wrong version or even the wrong chip. If you are having problems with one of these could you have a look at the number on the chip in you PSU and post it to me? If so I will post all my findings when I get to the bottom of this.
Regards
Peter
_________________
Peter |
|
| Back to top |
|
|
Guest
|
| Posted: Tue Oct 23, 2012 6:52 am Post subject: Re: PWR0502204001 |
|
|
| peter_ling wrote: | | as the chip PU1 was not very easy to read I may have got the wrong version or even the wrong chip. If you are having problems with one of these could you have a look at the number on the chip in you PSU and post it to me? |
ob2269cp |
|
| Back to top |
|
|
|
|
|
FAQ
