| View previous topic :: View next topic |
| Author |
Message |
holysheetman2005
Guest
|
 Posted: Mon Jul 25, 2005 5:36 pm Post subject: Ford 2006 RDS (dolby system) removal |
 |
|
| ok, this is my stock receiver unit on my 1994 Ford Escort (british spec) - I need the right size receiver handles so I can remove it. Anyone know if I can use something other than the normal tool? Any tips on removing this would help, I have never done it before. Thanks. |
|
| Back to top |
|
 |
Morrowrj
Joined: 14 Apr 2005
Posts: 29
Location: Pittsburgh, PA
|
| Posted: Mon Jul 25, 2005 5:49 pm Post subject: Ford 2006 RDS removal |
|
|
Sure thing, i have used heavy gauge (wire) coat hangers many times. I just bent them into two horseshoe shapes. The trick is to get them to release simultaneously as if you release just one side it will jam, and you will have to push it back and start over.
Good luck,
Robert |
|
| Back to top |
|
|
FranticMan
Guest
|
| Posted: Thu Sep 08, 2005 5:24 pm Post subject: Ford 2006 RDS removal : Coat Hangers |
|
|
| The simultaneously release is trickier than it sounds! I tried it and the handers got pretty mangled which left feeling for when to push in pretty tricky. Am I right in thinking there's a bit of skill/feel needed for this? |
|
| Back to top |
|
|
|
|
|
FAQ
