philips 32pw/blinking

polaret · Joined: 23 Oct 2004 Posts: 90 Location: greece

Hello i have a philips 32 pw9763/32 TV and the problem is that doesn t power on and the led blinking continious any help?

skila · Joined: 19 Aug 2008 Posts: 3

You'd better connect manufacturer.
_________________
Refurbished and used electronic test equipment, Network Analyzers, Oscilloscopes, and Power Supplies.
Used Test Equipment

polaret · Joined: 23 Oct 2004 Posts: 90 Location: greece

Does anyone know how can i get to service mode?

polaret · Joined: 23 Oct 2004 Posts: 90 Location: greece

The TV has been repaired
The fault was burned capasitor (blue 220n/2-3k to the horizontal out ) and IRF 620 .
But now i have to erase the fault from service mode any help how to get in?

inkaz · Guest

Why do you want to erase the error buffer? Notes there does not affekt any funktion of the set. If you necessary must... there is two way´s.
Get a´"DST" service remote (not longer avaible) Or short the service jumper marked SAM on the signal board while starting upp with main switch. Yers ago when I had a MD2.2 chassie to repair so I don,t remember where posision for the jumper is. But it,s placed on ssb.
Good luck.