| View previous topic :: View next topic |
| Author |
Message |
MacGyver
Guest
|
 Posted: Tue Jan 03, 2006 1:42 am Post subject: Half Screen |
 |
|
I have this Monitor and it has this problem
i think the model is KD-1730 i cant still figure out the manufacturers name
 |
|
| Back to top |
|
 |
kilork
Joined: 05 Dec 2005
Posts: 26
Location: Poland
|
| Posted: Tue Jan 03, 2006 7:41 am Post subject: |
|
|
HI!
You should check the stage of frame ( the coils, electrolyt cap. IC)
If you haven't due skills you ought to buy new LCD monitor. Regards |
|
| Back to top |
|
|
nera
Guest
|
| Posted: Mon Jan 16, 2006 1:44 am Post subject: re |
|
|
| change all electrolite cappacitors in vertical deflection stage |
|
| Back to top |
|
|
genux
Guest
|
| Posted: Mon Jan 16, 2006 5:15 am Post subject: vertical |
|
|
excuse me for my bad english..
falt is in powers supply..
probably vert srage fault for low voltage (also horizzontal deflection is defective!!!)
hi |
|
| Back to top |
|
|
sparky
Joined: 18 Nov 2005
Posts: 98
Location: U.K
|
| Posted: Fri Jan 20, 2006 12:29 am Post subject: Half Screen |
|
|
All above answers are correct but do not be tempted to use while in this condition or further problems will follow and turn down the brightness/contrast or you will see a permanent line on the tube enen after a repair.
_________________
If in doubt pull the plug out. |
|
| Back to top |
|
|
MacGyver
Guest
|
| Posted: Fri Jan 20, 2006 2:46 pm Post subject: |
|
|
| im still troubleshooting the said monitor but when i tried to change a Capacitor on the power supply section the picture noticeably tilts, (i cant control it with the Menu) i tried to bring back the old one and it still the same any clues? |
|
| Back to top |
|
|
sparky
Joined: 18 Nov 2005
Posts: 98
Location: U.K
|
| Posted: Fri Jan 20, 2006 7:25 pm Post subject: Half Screen |
|
|
I think the monitor is made by KDS and noticed the nanual is available from this site. Just type in kd1730 and download both parts and see if it is the same and concentrate on the frame circuit.
_________________
If in doubt pull the plug out. |
|
| Back to top |
|
|
cleggy
Joined: 04 Feb 2006
Posts: 8
|
| Posted: Thu Feb 09, 2006 1:33 am Post subject: drivers |
|
|
just a thought have you made sure that if its a pc monitor that you are using the correct drivers for the monitor
pc expert |
|
| Back to top |
|
|
gest
Guest
|
| Posted: Sun Feb 26, 2006 9:24 pm Post subject: |
|
|
the posibitily that it is a sriver problim is highly unlky
step 1 down load that manule
step 2 fix the power serply section that will get your menu back
step 3 stat checking that vertical section
if all elese fails get your self new one. |
|
| Back to top |
|
|
gest
Guest
|
| Posted: Sun Feb 26, 2006 9:28 pm Post subject: |
|
|
im meen horizontel section
ps there are soom sweet moniter out there with your name on
just buy one |
|
| Back to top |
|
|
|
|
|
FAQ
