View previous topic :: View next topic |
Author |
Message |
Braisntorm Guest
|
Posted: Mon Jun 26, 2006 11:25 pm Post subject: Philips 29PT9416, flashing red light |
|
|
As the TV is working normally it suddenly goes to stand-by mode and red light starts flashing (in standby mode the light is usually on but doesn't flash). If I turn the power off and on it will start normally. After a couple of minutes the same will happen.
Any help??? |
|
Back to top |
|
|
panikos Guest
|
Posted: Mon Nov 27, 2006 7:44 pm Post subject: hi..do u garet? |
|
|
i have same problem do u find the problem???
pls tell me |
|
Back to top |
|
|
minnie
Joined: 18 Aug 2005 Posts: 2881 Location: Hell
|
Posted: Tue Nov 28, 2006 1:04 am Post subject: |
|
|
what's the chassis #? |
|
Back to top |
|
|
kostas_a22
Joined: 20 Oct 2004 Posts: 8 Location: GREECE
|
Posted: Tue Nov 28, 2006 5:42 am Post subject: |
|
|
The chassis is MG3.1E.
T504 has dry joints. |
|
Back to top |
|
|
skagon Guest
|
Posted: Thu Nov 30, 2006 2:44 am Post subject: Joints |
|
|
I'm having the exact same problem.
Kostas, do you think I should try and locate that transistor and re-heat its joints?
My TV had schematics with the manuals, I believe with a bit of luck I can spot that T504. Unless of course you can inform me of its whereabouts.
Liakos, Athens |
|
Back to top |
|
|
kostas_a22
Joined: 20 Oct 2004 Posts: 8 Location: GREECE
|
Posted: Tue Dec 05, 2006 8:16 am Post subject: |
|
|
Sorry....
T5204 has dry joints. |
|
Back to top |
|
|
lefteris Guest
|
Posted: Wed Dec 12, 2007 7:11 pm Post subject: 29PT9416 CRT |
|
|
I also had the problem with the sudden power down and red led flashing on a philips 29PT9416 crt. I only had to resolder the transformer No. 5204 on the power board. This board is standing vertically on the right side as we look the TV from the back. The 5204 is about in the middle. |
|
Back to top |
|
|
Guest
|
Posted: Sat Sep 12, 2009 5:36 pm Post subject: |
|
|
kostas_a22 wrote: | Sorry....
T5204 has dry joints. |
Hi Kostas,
what can we do if there are dry joints?
(I have the same problem) |
|
Back to top |
|
|
minnie
Joined: 18 Aug 2005 Posts: 2881 Location: Hell
|
Posted: Sun Sep 13, 2009 6:47 am Post subject: |
|
|
Resolder what was explained...
Anonymous wrote: | kostas_a22 wrote: | Sorry....
T5204 has dry joints. |
Hi Kostas,
what can we do if there are dry joints?
(I have the same problem) | |
|
Back to top |
|
|
a123xxsp
Joined: 13 Sep 2009 Posts: 1
|
Posted: Sun Sep 13, 2009 8:39 am Post subject: |
|
|
Thanks minnie, (I am Antony, I was the "Guest" in the previous post because I justed subscribed)
I was confused by the "Sorry" Kostas wrote. sounded like I couldn't solder dry joints. I don't know what a dry join is
I found the service manual and diagrams for the MG3.1E
http://www.eserviceinfo.com/downloadsm/10716/philips_32pw9525/05.html
(5 parts rar)
minnie wrote: | Resolder what was explained...
Anonymous wrote: | kostas_a22 wrote: | Sorry....
T5204 has dry joints. |
Hi Kostas,
what can we do if there are dry joints?
(I have the same problem) | | |
|
Back to top |
|
|
|
|