| View previous topic :: View next topic |
| Author |
Message |
DejaVu
Joined: 02 Jul 2007
Posts: 93
|
 Posted: Thu Jul 19, 2007 12:55 am Post subject: Toshiba 42" Rear Projection TV Standby Problem. 42PW33 |
 |
|
I aquired another Projection TV made by Toshiba. Unfortunately, it's had the serial sticker at the rear removed for some reason.
But after a few hours searching, I strongly believe it to be a 42PW33
(http://www.home-entertainment.toshiba.co.uk/consumer/products.nsf/files/42PW33/$file/42pw33.jpg?openelement)
Anyway, I know it has a convergance problem, that I will replace the IC's afterwards. But the main problem at the minute with this one is it's not turning on. It's stuck in standby I guess.
It has 2 LED's on the front. 1 red, 1 green. Red is permanently on. When trying to exit standby to use, the TV makes the 'hiss' noise for a split second then the green light starts to flash. This light is next to what looks like a 'Sleep Timer' function icon. Any idea's? Or perhaps someone knows where I might find a service manual for it? |
|
| Back to top |
|
 |
minnie
Joined: 18 Aug 2005
Posts: 2877
Location: Hell
|
|
| Back to top |
|
|
DejaVu
Joined: 02 Jul 2007
Posts: 93
|
| Posted: Thu Jul 19, 2007 11:42 am Post subject: |
|
|
Hi Minnie... Your the most helpful person on this section! 
My Samsung chips arrived this morning, gonna be soldering those in a mo.
This Toshiba one though, I obviously did the search before posting and did find that post. Although that is about the convergence, I cant seem to get the machine on. Is that doing it to 'safe guard' anything blowing?
IE - I need to change the chips in order to get it out of the standby problem? |
|
| Back to top |
|
|
minnie
Joined: 18 Aug 2005
Posts: 2877
Location: Hell
|
| Posted: Fri Jul 20, 2007 12:12 am Post subject: |
|
|
| Hell yes, it's common for the IC's to make the set go into shut down because shorted IC's will trip the x-ray protect. Change the ic's, check the pico fuses, and check the resistors. Same as the samsung. |
|
| Back to top |
|
|
DejaVu
Joined: 02 Jul 2007
Posts: 93
|
| Posted: Fri Jul 20, 2007 1:58 pm Post subject: |
|
|
After loads of searching and thumbing through forum after forum, site after site.
I've found (I think) the name of the IC's I need for this model.
They are much smaller than the repvious ones, but please check my findings please.
These IC's are names SLA4501M's and have the number 3517 written on the side with JAPAN in large letters. I'm sure I've found them as they have 3 large heatsinks attached to them.
If I'm write, I've tried a google search to find a place to get these from and it was very vague in it's search.
Any ideas Minnie? |
|
| Back to top |
|
|
DejaVu
Joined: 02 Jul 2007
Posts: 93
|
| Posted: Fri Jul 20, 2007 2:00 pm Post subject: |
|
|
| Sorry (Typo's galore!) LOL |
|
| Back to top |
|
|
minnie
Joined: 18 Aug 2005
Posts: 2877
Location: Hell
|
| Posted: Fri Jul 20, 2007 11:02 pm Post subject: |
|
|
| Working on it. Not a US model. |
|
| Back to top |
|
|
DejaVu
Joined: 02 Jul 2007
Posts: 93
|
|
| Back to top |
|
|
minnie
Joined: 18 Aug 2005
Posts: 2877
Location: Hell
|
| Posted: Sat Jul 28, 2007 6:37 pm Post subject: |
|
|
I can't find a service manual on this. 
Toshiba usually uses 392-110's. |
|
| Back to top |
|
|
DejaVu
Joined: 02 Jul 2007
Posts: 93
|
| Posted: Sat Jul 28, 2007 11:12 pm Post subject: |
|
|
Gonna get further in to find 'em! Hopefully the little sods are in there some place!  |
|
| Back to top |
|
|
|
|
|
FAQ
