| View previous topic :: View next topic |
| Author |
Message |
Guest
|
 Posted: Sun Jan 13, 2008 5:25 pm Post subject: JVC VCR eject problems |
 |
|
HI
I have a JVC HR-s9800u
The eject motor keeps running for 10 seconds after the tape ejects. Then the unit shuts down. I really want to fix this thing, as its a nice unit.
Thanks in advance. |
|
| Back to top |
|
 |
pawluf
Joined: 10 Jan 2008
Posts: 18
Location: Malta G.C.
|
| Posted: Sun Jan 13, 2008 7:21 pm Post subject: |
|
|
I haven't the manual for your particular set. Be it could easyly be a widened belt.
_________________
Pawluf
Malta G.C. |
|
| Back to top |
|
|
Justmanuals
Joined: 21 Aug 2004
Posts: 1949
|
|
| Back to top |
|
|
Guest
|
| Posted: Sun Jan 13, 2008 8:26 pm Post subject: |
|
|
Are you refering to the load motor belt?
Thanks |
|
| Back to top |
|
|
pawluf
Joined: 10 Jan 2008
Posts: 18
Location: Malta G.C.
|
| Posted: Sun Jan 13, 2008 8:58 pm Post subject: |
|
|
Yes, a set of belts can be bought quite cheaply.
_________________
Pawluf
Malta G.C. |
|
| Back to top |
|
|
Guest
|
| Posted: Sun Jan 13, 2008 10:07 pm Post subject: |
|
|
hi
Do you know what determines when the motor should stop? Is it the mode switch or is there a switch or sensor...?
Thanks |
|
| Back to top |
|
|
pawluf
Joined: 10 Jan 2008
Posts: 18
Location: Malta G.C.
|
| Posted: Sun Jan 13, 2008 10:24 pm Post subject: |
|
|
Unless it is a very old model it will be the mode switch. Otherwise a visable leaf switch at the top of the deck.
_________________
Pawluf
Malta G.C. |
|
| Back to top |
|
|
Guest
|
| Posted: Mon Jan 14, 2008 12:43 am Post subject: |
|
|
found it....
cracked solder joint on the side phototransistor.
Thanks again for your help... |
|
| Back to top |
|
|
pawluf
Joined: 10 Jan 2008
Posts: 18
Location: Malta G.C.
|
| Posted: Mon Jan 14, 2008 12:02 pm Post subject: |
|
|
Good. We would have come to that.
_________________
Pawluf
Malta G.C. |
|
| Back to top |
|
|
|
|
|
FAQ
