| View previous topic :: View next topic |
| Author |
Message |
mhuk
Joined: 16 May 2006
Posts: 7
|
 Posted: Tue May 16, 2006 4:17 pm Post subject: DVD player - "no disk" message |
 |
|
When I insert a dvd into my Panasonic s75 the tray stops before it closes.
If I push it shut I get a "no disk" message.
Is this easily repairable or is it a bin job?
Thanks  |
|
| Back to top |
|
 |
gary
Joined: 05 Apr 2005
Posts: 584
Location: MANCHESTER, uk
|
| Posted: Tue May 16, 2006 5:16 pm Post subject: |
|
|
| AFTER INSERTING THE DISC SEE IF IT ROTATES, IF IT DOES NOT GIVE IT A NUDGE TO SEE IF IT STARTS TO ROTATE, IF IT THEN ROTATES THE SPINDLE MOTOR IS PROBABLY U/S, CHECK ITS RESISTANCE TO BE SURE, IT SHOULD BE BETWEEN 12R & 14R AT ALL POINTS OF ROTATION. |
|
| Back to top |
|
|
mhuk
Joined: 16 May 2006
Posts: 7
|
| Posted: Tue May 16, 2006 5:21 pm Post subject: |
|
|
| Thanks for the reply. How do I nudge it if the tray is closed? |
|
| Back to top |
|
|
gary
Joined: 05 Apr 2005
Posts: 584
Location: MANCHESTER, uk
|
| Posted: Tue May 16, 2006 5:42 pm Post subject: |
|
|
| TAKE THE LID OFF THE SET, WHEN THE TRAY CLOSES YOU WILL BE ABLE TO SEE THE DISC IN THE MECH, I USUALLY USE A COTTON BUD TO GIVE IT A START IN THE CLOCKWISE DIRECTION. |
|
| Back to top |
|
|
mhuk
Joined: 16 May 2006
Posts: 7
|
| Posted: Tue May 16, 2006 5:46 pm Post subject: |
|
|
| Doh! I should have thought of that- I'll have a go and see what happens |
|
| Back to top |
|
|
mhuk
Joined: 16 May 2006
Posts: 7
|
| Posted: Tue May 16, 2006 6:43 pm Post subject: |
|
|
When I press the "close" button the tray starts to close then stops. The little piston that appears to close the tray moves a few times then stops. If I push the tray closed the disk just sits in the tray- the "spindle" appears not to move up to the disk (as I guess it thinks the tray is still open). So no it doesn't move if I touch the dvd.
Ideas? |
|
| Back to top |
|
|
gary
Joined: 05 Apr 2005
Posts: 584
Location: MANCHESTER, uk
|
| Posted: Tue May 16, 2006 8:11 pm Post subject: |
|
|
| MECHANICAL ALIGNMENT IS POSSIBLY INCORRECT, EVERYTHING ON THIS MODEL IS DRIVEN FROM THE SLED MOTOR, IF TRAY IS OUT BY 1 TOOTH IT WILL FAIL TO LOAD CORRECTLY. NOT AN EASY MECH TO RESET, SEND ME YOUR EMAIL ADDRESS AND I WILL SEND YOU THE INSTUCTIONS |
|
| Back to top |
|
|
mhuk
Joined: 16 May 2006
Posts: 7
|
| Posted: Tue May 16, 2006 8:25 pm Post subject: |
|
|
| Thanks for your help, PM sent |
|
| Back to top |
|
|
mhuk
Joined: 16 May 2006
Posts: 7
|
| Posted: Wed May 17, 2006 3:54 am Post subject: |
|
|
It opens correctly, just stops on the close. Which section is for realigning the tray?
Thanks again |
|
| Back to top |
|
|
gary
Joined: 05 Apr 2005
Posts: 584
Location: MANCHESTER, uk
|
| Posted: Wed May 17, 2006 4:13 pm Post subject: |
|
|
| click on navigator then section 9 |
|
| Back to top |
|
|
|
|
|
FAQ
