|20-08-2014||sa tx-30||it works 100% ! Thanx a Lot !!! Just need to re solder connector pins.|
|20-08-2014||Re: Clarion PN2715N||Hello!
I have a problem with the original changer Nissan Clarion PN-2715N [CD6k-1400E]. When I put the newly recorded disc system threw me the message "DISK READ ERROR". I thought that the problem lies in the dirty laser lens - |
|20-08-2014||You DID remove the shipping shorting strip after installation?|
|21-08-2014||Buna||Buna am puteti ajuga sa aflu codul de deblocare pentru radio cd pt scoda fabia2003. Seria este SKZAZ8C1311526; 6y0035156a. Multumesc|
|21-08-2014||Video||Need schematic for Videotek VDA-16 video distribution amplifier.|
|22-08-2014||Cookworks D80D20EL-DB Manual?||I need manual for Cookworks D80D20EL-DB|
|22-08-2014||Re: Cookworks D80D20EL-DB Manual?||OPS!
Model: Cookworks D80D20EL-DB Manual?|
|23-08-2014||It's about removing the solder with a laser? He was not in the two lasers as soon as I opened the package?
|23-08-2014||Need help with a TWP tv model number lcd 2641 id||Good morning,
I need your help again please, i am not the most experianced amateur repairest but i do enjoy trying to fix things.
I got given this tv that has a intermitent problem with it, it goes onto standby but wont always turn on.
When it does w|
|23-08-2014||Some short the pads, some use metal clips across end of flex wire (or plugged into a socket).
|23-08-2014||See now? It pays to buy the cheapest. :shock:|
lol yeah i know its cheep lol just thought it would be a good project to try with a little help from you guys, ok a lot of help for you guys lol.
You got any idea how mite make it for TWF mate. Or if you have any ideas what i might be looking f|
|23-08-2014||Good visual exam of the innards.
Read the [size=7:81d5bb967f]small[/size:81d5bb967f] print on the label for country of manufacture.|
|24-08-2014||DTK PTP-4007P schematics request||I urgently need schematics for this ATX 400W power supply.
I have noticed that 2 resistors are missing (broken off, only pins left).
R52 and R69.
R52 is for the TL494 negative input error amplifier. I don't know what R69 is (is is in parallel with |
|24-08-2014||I don't know what is wrong with this forum. I have registered as "Slobodan_covek" (this topic is mine) but I can not log in (incorrect username and/or password)...|
|24-08-2014||Both new lasers that I bought did not solder a static point - photo.
My laser -> http://www.aliexpress.com/item/Sony-KSS-662-KSS-660-6-DISC-CD-optical-pick-up-KSS662-laser-lens-for-car/1191622869.html
On the tape I dont solder, only replaced the |
|24-08-2014||I think that R52 is 4,7 Komh, but I still don't know about R69.
R69 is in parallel with other 2 resistors then they are in series with resistor and 2 opposite zener diodes, and so on. I dont think that it is crucial.
I still need that schematics.|
|24-08-2014||.||I did a bit of digging on google and found this TWF are a sub-brand of the Siemssen Electronics Group in Norderstedt, Germany.
I dont know if this would help to find a service manual for this telly.
I have had a very long look at the inners of the tv b|
|24-08-2014||Do not have the specific diagram but there are several ATX supplies are posted below and you can do a search on elektrotanya.com that may be of some help. There are many, many different ATX supplies out there and chances of finding all is remote at best. |