Date | Header | Text |
12-01-2009 | | yep thats def a prob, any idea how to rest lamp hours? |
12-01-2009 | | http://spares.bigwarehouse.com.au/file.php?document_id=%20%20%20%205868 |
12-01-2009 | n2652w | Hi All.
I have a viewsonic N2652w with a power supply that was dead
fsp212-3f01. caps 1500uf and 220uf were bullgy. repalaced the 1500uf
with 2200uf,
Q7 and R65 were badly burnt. replaced with unknown. now unit looks
good. I would not continue to |
12-01-2009 | | DVDC750 was actually made by Philips for Yamaha--probably one of the least relaible as far as the transport mechanism. Not a complicated mechanism but rather easy for the tray to become misaligned. Just one round planetary gear that has to be timed proper |
12-01-2009 | panasonic PT51G44cA | chassisAP815
tv works fine except that the picture is dark any shows that have night scenes are kinda hard to make out the picture but otherwise it still works well.
any ideas on what i can check or test to find the problem.
also anyone willing t |
12-01-2009 | Re: panasonic PT51G44cA | I assume user controls work, but do not give enough brightness. First I'd mark the SCREEN control on the flyback transformer, and then try slowly increasing its setting.
I'll see if I can locate service literature. |
12-01-2009 | Re: Oops | Same but screen controls on focus/screen block. |
12-01-2009 | | Hi everybody,
me too I have the same problem with my LG Philips LC320W01 (SL) 12
I turn progressively to green even without any cable
please help me |
12-01-2009 | Denon UD-M50 cd tray repair | Afternoon,
Using a Denon UD-M50 cd player and the cd changer / carousel broke. Taken it apart and currently putting back together everything, wondering if anyone could be of any help?
I can't find where to put this - a small mechanism of grey plastic wi |
12-01-2009 | | ok i've found where the spring goes, but now i need to find out how to release the cd 'clamp' at the back of the machine.
trying to put the trays (1-3) back in, and until i can release whatever is holding this back slot closed i'm stuck.. help appreciate |
12-01-2009 | Re: TechLine 37" LCD TV green color instead black | [quote:88fcda1491="pecello"]>Sounds like a cable unplugged or a bad T-con board.
Cables are OK,btw what is T-con board????
[/quote:88fcda1491]
T-con (timing control board) ? |
12-01-2009 | | Before proceeding with replacing the chip, make sure that the fault is there and not elsewhere in the tv:
-Check that the supply voltage for TDA3562 is correct (usually +12V)
-Make sure that incoming composite video seems to have correct level of th |
12-01-2009 | yes | hi yes all the user control work i can turn the brightness and contrast up to a point where picture is fairly bright but sdtill get the darker than normal picture.
thanks for reply
as for screen control setting is this a black plastic case seen fro |
12-01-2009 | Re: Oops | [quote:47f9dd1463="jts1957"]Same but screen controls on focus/screen block.[/quote:47f9dd1463]
yes thats the adjustments i tried thanks no difference |
12-01-2009 | Re: TechLine 37" LCD TV green color instead black | [quote:ba84ed16b3="eauyong"][quote:ba84ed16b3="pecello"]>Sounds like a cable unplugged or a bad T-con board.
Cables are OK,btw what is T-con board????
[/quote:ba84ed16b3]
T-con (timing control board) ?[/quote:ba84ed16b3]
Yes. If the T-conn do |
12-01-2009 | | Have you test the CRT? |