Date | Header | Text |
28-10-2009 | | Not short of replacing the SSB "small signal board." I pulled up model 42PFL5603D27 with a part number of 313918900001. |
28-10-2009 | | [quote:779a553a9a="minnie"]Not short of replacing the SSB "small signal board." I pulled up model 42PFL5603D27 with a part number of 313918900001.[/quote:779a553a9a]
is it safe to short? |
29-10-2009 | | "Flyback(s)" are used only in CRT equipped sets.
You probably mean "transformer." :)
Capacitors can "look" perfect, yet still be defective.
[quote:593ab5c5f5="kolevbg"]I have an SPS from a very late model LCD TV (Vio |
29-10-2009 | | Thanks. I have replaced the belt. No result. Checked up switches - OK. Increased the current of laser - the unit came back to life, reads CD, CD-R. The sound is clear and musical. Pity, I think it's for a short time. Have ordered new LH KSS210A (original |
29-10-2009 | | You can get Technics SU-G96 service manual at http://www.schematics.me/index.php?cat=16&brand=184 |
29-10-2009 | | You can get the Sylvania SL195SL9 service manual including schematics at
http://www.schematics.me/index.php?cat=16&brand=352 |
29-10-2009 | | If you are not getting any diplay sounds like you have a motherboard issue! |
29-10-2009 | | This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
29-10-2009 | SCHEMA ELETTRICO TV SONY KV C 2521A | cerco schema elettrico tv SONY KV C 2521A
grazie |
29-10-2009 | | Yes, sorry...still learning the lingo...apparently what I should have said is "transformer" , not "flyback".
Anyway, in the meantime I made some progress and am now facing the following problem:
I have a miniature 6 pin (2x3) pow |
29-10-2009 | black screen | Check the power supply for bulged tops on the capacitors.Also Partstore has refurbished power supplies for between $100 to $200.they are on the web. |
29-10-2009 | Re: Schematic of TV Universum FT4306 | [quote:7cc43f7269="EugenyO"]The problem is solved. I find schematic PC04A chassis (Universum FT 4306)[/quote:7cc43f7269]
Where you find it???? |
29-10-2009 | Thanx Dan | I pulled out the power supply and checked the fuse, it is good. I looked at all of the caps and none are popped nor do any look like the tops are bulging. Thanks for the response. |
29-10-2009 | | [quote:ad11cb86e0="mrroboto"][quote:ad11cb86e0="minnie"]Not short of replacing the SSB "small signal board." I pulled up model 42PFL5603D27 with a part number of 313918900001.[/quote:ad11cb86e0]
is it safe to short?[/quote:ad11cb86e0]
Shor |
29-10-2009 | | Is there any logo on the chip, which could help identifying it?
There are sites containing electronic manufacturer's logos, so if you look it with a magnifying glass you could be at least identify the manufacturer.
Once I had few blown resistors with |
29-10-2009 | | This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
30-10-2009 | | I believe I am having the same problem that you are goldenboy, only I have a Vizio GV47LF HDTV10A. I have removed my power supply and cannot see any problems with it so I might work towards what you are talking about. The parts are available at vizparts |
30-10-2009 | | Nope...it is so small that those 5 digits are all that could fit...looks more like small SMD resistor matrix than an IC...either very slightly larger or - more likely - exactly the size of corpus SOT-346 - 2.9 mm x 1.6 mm . |
30-10-2009 | | First thing you want to do is inspect the power supply and inverters for bulged caps. |
30-10-2009 | | [quote:823006060a="Rep@ir Sh@ck"]If anyone is interested, I found the fault with this TV. Chopper tx flashing over on primary causing set to go into burst mode.[/quote:823006060a]
And the fix was? |
30-10-2009 | Coffee | Just wondering if you have had any sucess with your project? |
30-10-2009 | | [quote:0a2e6427f3="jts1957"]
[quote:0a2e6427f3="kolevbg"]I have an SPS from a very late model LCD TV (Viore)...
I forgot to mention the board is brand new. [/quote:0a2e6427f3]
Are you talking about ONE board or TWO? :?[/quote:0a2e6427f3]
One pow |
30-10-2009 | LG Plasma | hello to all..
I got a plasma LG Model 60PC1D an I am gettin no picture but clear sound.
Can anyone help me out in solving this problem..
Thank you!! |