|10-06-2009||sanyo p55 plus||Hi i am looking for service manual for sanyo p55 plus AMP can anyone help?
Thanks in advance|
|10-06-2009||hey jts, that was not me replying. apparently he typed my name in the username box. lol.|
|10-06-2009||Weller EC1301A Soldering iron||Hi All
i've just picked up a solder station with a damaged temperature sensor in the Iron. I've nothing left of the sensor so can't measure it and the chip in the controller is stamped up weller so cant id that. Does anyone have an incling of the type of|
|10-06-2009||Samsung SP43-H3HT colour allignment????||Samsung sp43h3ht rear projection TV colours out on the left and a bit blurry,self focus is out a bit, does any1 have the factory data for the samsung sp43h3ht TV as i do not know how to align them on the remote control???
|10-06-2009||Samsung SP43-H3HT colour allignment||Samsung sp43h3ht rear projection TV colours out on the left and a bit blurry,self focus is out a bit, does any1 have the factory data for the samsung sp43h3ht TV as i do not know how to align them on the remote control???
|10-06-2009||alpine cd problem||Hi again
I have a alpine cde-9850i with a cd problem.It tries to read disc,then cd error is displayed.Replaced lazer but cd still not working .laer tries to focus and disc dose not spin.Any help will do .Thanks|
|10-06-2009||Get/read the user manual from cover to cover.
YOU can do anything it mentions in there, but if you don't have the expertise to do anything else, you'd be better off leaving it to the pros.
(You seem to have had difficulty deciding in which forum to even|
|10-06-2009||Spindle motor would be "next."|
|10-06-2009||alpine repair||Thanks jts1957|
|10-06-2009||if you have a variable power supply, try putting about 3v to the spindle motor and see if it turns easily. if not it is probably the motor if it does it may be the motor driver ic, which is easily recognizable because it has a heat sink in the middle of |
|10-06-2009||Follow the flyback, there should be a diode feeding the IC.|
|10-06-2009||The red and blue should be adjustable in the customer menu.|
|10-06-2009||Either he forgot a pico fuse or missed a resistor. If he's done all that it could be a bad DCU/what store the convergence data.|
|11-06-2009||[quote:df02485945="Anonymous"][quote:df02485945="jts1957"][quote:df02485945="jts1957"][b:df02485945]see if there's an "add" and "erase" button on the apron.
If so, do step #1, hitting "add" after you "enter" whate|
|11-06-2009||Well, from [b:6df6de97c4]that description[/b:6df6de97c4], I'd have to say bad connections inside the Tuner. Bad Tuner. :(
I wonder if the manual add/erase works if "press hard the cable/ antenna"?|
|11-06-2009||Hitachi 50SBX70B Help Needed||I have read the entire forum. Had same problem as many others. Replaced the C707 and E994 tonight. Plugged in TV. Im certain that 5 green lights came on. I am not sure about K427. Powered on, K427 lit along with all the other green lights. Quickly |
|11-06-2009||[quote:36985d58b0="SMS510"]I have read the entire forum.[/quote:36985d58b0]
[quote:36985d58b0="SMS510"]Also, in the interest of time does anyone know of a common retailer I could buy diodes, pico fuses etc.....[/quote:36985d58b0]
If you meant this &qu|
|11-06-2009||[quote:09a398be25="jts1957"]Well, from [b:09a398be25]that description[/b:09a398be25], I'd have to say bad connections inside the Tuner. Bad Tuner. :(
I wonder if the manual add/erase works if "press hard the cable/ antenna"?[/quote:09a398be25]|
|11-06-2009||You're welcome. Have a nice night (or is it day)?|
|11-06-2009||[quote:31adafc3f3="jts1957"]You're welcome. Have a nice night (or is it day)?[/quote:31adafc3f3]
day sir,a million thanks again sir & goodluck.|
|11-06-2009||Re: samsung CDP15B1 (G)||[quote:4b1e2171ba="gameshark888"]hello and good day to all!
my problem is about my Samsung CDP15B1 (G) CRT Monitor the screen went flickering.. until it went out.. the screen turned dark..
Does any one have any service manual for my monitor? It wou|