|25-01-2010||Panel or buffer board.|
|25-01-2010||Bulged caps on the power supply.|
|25-01-2010||Probably the flyback is bad #262341.|
|25-01-2010||Of course a model may help.|
|25-01-2010||This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from:
|26-01-2010||Sony KD32DX51 colour problems||Hi,
After having a perfect picture from day 1, my 4 year old Sony Wega KD32DX51 CRT tv appears to have suddenly developed a fault.
Sometimes the picture is perfect but on some scenes, about half a second to a second after the scene has changed on sc|
|26-01-2010||Re: Need power pushbutton for Mitsubishi M-VR400 A/V receive||[quote:075b76acf0="mgreen"]My Mitsubishi M-VR400 A/V receiver has a broken power pushbutton. This is a plastic (non-electrical) piece that pushes on a micrswitch mounted on a circuit board inside. I called Mitsubishi but they won't sell me the part, give |
|26-01-2010||Look AGAIN. :-)|
|26-01-2010||The diopter adjustment knob has a black sticker over the screw. Remove the sticker and the screw and this should be your last step|
|26-01-2010||CLOSE FRONT DOOR AFTER IT IS CLOSED||HELLO GREAT I HAVE FOUND THIS FORUM.
MY GP335 IS WITH A REPAIRER FOR SERVICING AFTER MICE INFESTATION.
WE HAD TO CHANGE THE LCD SCREEN TO A GP405 ONE.
IT KEEPS DISPLAYING 'FRONT DOOR NOT CLOSED'. THE TECHNICIAN HAS TRIED ALL HIS OPTIONS TO NO AVAIL.
|26-01-2010||Philips MX3800D Turns self off||I have A Philips MX3800D dvd player, after about half hour or so of playing a DVD it turns itself off and then about 10-15mins later the power is returned. I'm guessing its something overheating on the power PCB but unsure.
Does anyone have any ideas?|
|26-01-2010||Or bad caps, or bad laser assembly, or etc., etc.|
|26-01-2010||I think i may have narrowed it down to the main PCB in the player as when it is turned on and off at the wall the standby light comes on and when pressed the light goes of as if turned on but then the screen is still blank, then after 5 mins the screen re|
|26-01-2010||Philips MCM8/22 CD read message "Disc not finalized&quo||Hello forum members!
Since my son inserted a DVD in my MCM8/22 Microssystem, I have this message when trying to play any commercial or non-commercial CDs : "Disc not finalized". This last message is a little strange for commercial CD, so usin|
|26-01-2010||Re: Repair tip for Viewsonic N3250W or N3235W power supply||[quote:c87114d766="jts1957"]:evil: PEOPLE [SZASZ] JUST CAN'T BE BOTHERED TO READ PRIOR POSTS (or just do a "Search" for "zd4"!)
"The answer to [b:c87114d766]MY[/b:c87114d766] question couldn't possibly be there already." :|
|26-01-2010||microwave||Its the door switch.they are usually interchangable between models.Take the outside cover off and you can get to it.
Take one off an old microwave,or get a new one at an appliance store.|
|26-01-2010||It sounds like your CRT tube is going. I't probably not worth putting the money into it.|
|26-01-2010||Most of the newer TV's use the flyback to generate all power supplies for the set. The fact that you still have sound tells me that the problem is likely related to the CRT or the CRT neck driver board. If the picture slowly went black, the heater eleme|
|26-01-2010||This sounds like a cracked solder connection on the power supply module.
I know there are lots of solder connections but the most common will be the large semiconductors (transistors, FET's, IC's). Use a very strong magnifing glass and good lighting. L|
|26-01-2010||This sounds more like the power supply is gone. Check the model number off the power supply and search for related posts here.|