Date | Header | Text |
23-02-2014 | | Not really a whole lot of information to work with here. |
23-02-2014 | | It sounds more like a component failure than a maintenance issue like a misalignment. Component replacement is not a very economical option. |
24-02-2014 | | [quote:7d868ea4e4="Boggs"]You can get the Technics SU-3050 service manual at www.schematics.me
http://www.schematics.me/purchase.php?id=Technics+SU-3050+Service+Manual+%2F+Schematics[/quote:7d868ea4e4]
Thank you for your reply.
How do I know if it |
24-02-2014 | Service manual or repair manual for Ford Expedition 2004 | Hello,
Can anyone help me to find the service manual or repair manual for my Ford Expedition 2004?
Thanks in advance.
Newton |
24-02-2014 | Wharfedale KP21TK218Q-G CRT TV | dear all,
i have a Wharfedale KP21TK218Q-G CRT TV, it is 21" and silver, about 10-15 years old roughly
and i need to get into the service menu on it, i wonder if anyone might be able to help me find out if there is a service manual for it or wh |
25-02-2014 | | It does contain schematics and parts list and the quality is very good. |
25-02-2014 | Repair my Takara CDV 1580 | Hello,
My car radio, Takara CDV 1580 works, but I can't open the screen and a ot of push-button don't work. I can operate it only from its remote control.
How can I repair it?
Thanks a lot. |
25-02-2014 | | Remove radio from vehicle.
Take radio apart on work bench.
Correct problems.
Reassemble radio.
Reinstall radio in vehicle.
DONE. :) |
25-02-2014 | Small update. | A little more info on the problem for those who would be in the same situation:
No backlight, no sound, red power led. After a long press on power key TV will cycle through power and timer leds blinking, power led green, relay on, relay off and back to |
25-02-2014 | | Any visually bad (Bulged top) aluminium capacitors on secondary side of PSU?
Check standby PS voltage and ripple.
Same for main PS when you try to get out of standby. |
25-02-2014 | | Hi,
Always unsolder at least one pin of electrolytics for ESR measurements, most of the time you'll have at least 2 electrolytics parallel on a given power rail, often one will fail but not always the others (Due to peak current ripple or temperature d |
25-02-2014 | | Thanks!
I'll try following your instructions.
I'll inform yu soon.
Newton. |