|05-10-2009||No, the transformer is not ok, but i can't find any reseller for the transformer. Where you buy your transformer?
|05-10-2009||OPC-782 ICOM Connection Cable||Hi all, i'm searching a schematic cable or Pin Connection for ICOM OPC-782 cable.
This cable is used for cloning memory (from portable rtx, to portable rtx), or for connect Headset with PTT (Push to talk function).
A special use of the 4 pin jack |
|05-10-2009||Servicemanual for Philips Proscreen 4600/LC 4600
Please send it to me by email
|05-10-2009||please service manual digital camera general electric A735||hello , please help me .I looking this service manual or parts catalogue or I need know where buy spare parts for this brand
thanks a lot :D|
|05-10-2009||menu popup||while watching tv the menu scheen keeps popping up and cant turn it off
|06-10-2009||New "findings"||OK, no one seems to care about this thread, but I'll post my latest thoughts about the red-level issue.
The R/G/B signals reach the IC401 (PRE-AMP), then they go to IC402 (RGB DRIVE). The OSD, which is internally generated picture/signal, is also affec|
|06-10-2009||Toshiba CF35F40 vertical out of sync||On Toshiba TV model CF35F40 I have replaced 503 KHz crystal resonator (23153721) and vertical output Q301 (TA8427K), I got back the vertical raster but it is out of sync. I tried to find a control to put it in sync but I did not found any. How can I adjus|
|06-10-2009||Sony TV KV29C1D - won't power up, stdby LED flashes 8 times||Hello.
Another issue with beloved SONY (:twisted:).
When I press the Power On button, the relay clicks on, the tube gets degaussed and HV is applied to it (characteristic sound). But then the relay clicks off, and the tube produces familiar "di|
|06-10-2009||Yikes.....||Ok well as always minnie I value your information. I just set an appointment for this Thursday for a local Toshiba repair shop to come out.
I am almost tempted to show him this thread, just to prove I'm not totally naive. This is going to be interesting|
|06-10-2009||Looked up that part #||Big difference between used and new panels. I wonder if they will replace it with a used panel? I don't see anything in my extended warranty saying they can or can't use a used panel. Of course I want new..The warranty company is City Assure/City Advantag|
|06-10-2009||[quote:5a5876d182="Anonymous"]I traced back to the input of the motor control IC (SIP #BA6209N) pins 5-6 and do not see a logic level voltage when using the remote. These are the input pins for the logic output directly from the microprocessor. I pulled t|
|06-10-2009||1992 Toshiba CN3081B Cinema Series||Hi, sorry it took me so long to reply.I have checked the diode connected to the flyback transformer and it is good...I am trying to figure it out how this diode is important to the problem that I am having.
|06-10-2009||The main reason in gluing the bigger caps is to prevent movement while the PC board travels through the wave solder machine in production.
There is no need for you to have them mounted remotely. Isn't there a removable bottom cover on that unit?
I really appreciate your input, thanks so much.
No there is no bottom access panel on this unit so I had to do quite a bit of dismantling to access the bottom of the PCB & even now the rather limited length of the ribbon cables is restrictive|
|06-10-2009||thanks.. If any free manual site is there, please inform me for which I will be highly gr8full.|
|06-10-2009||Yamaha RX-V520 Main Speaker not turning on||Hi,
I have a Yamaha RX-V520 A/V receiver which up until recently worked fine. About a month ago one of the front channels started to become a bit flakey and eventually both L & R front channels stopped working. I have looked over the unit and the D|
|06-10-2009||Sony Sa-va 700||Hi! I am having problems with my system. The right side rear speaker keep turning on and off. I checked the back and noticied that when i move the some wires on the inside it begins to work again or when I move a what seems to be a blue circuit. i want to|
|06-10-2009||Re: Trouble with Toshiba e-studio 35||hey,did you check the hardrive
|06-10-2009||Re: Problem with Toshiba e-studio 35||format your hardrive or check if your machine has the same ip adress as
|06-10-2009||Re: I have a problem with my TOSHIBA E-STUDIO45!!!!!||That sounds like a fucer unit problem. check your heaterlamp,resistors or thermofuse.
|06-10-2009||Child Lock Password Problem||Pl. Child Lock Password No. Onida Oxigen Portable TV|
By bypassing the main speaker relay everything works great. Does anyone know if this might be the uController or some protection issue?
|06-10-2009||Thin Black Line||As always. Thanks for all the input.
The black line hasn't reappeared since the weekend but still have Panasonic scheduled to come out and check it out anyway .Will let you know what they find if anything.Thanks again.|