Date | Header | Text |
04-10-2008 | | Hi,
But while receiving the signals, the mobile handset should b receiving certain voltage or current, i like to know that,
how much is the [b:d7981f34a0]CURRENT / VOLTAGE[/b:d7981f34a0] level which is received by mobile phone while rece |
04-10-2008 | MATSUI TV 28WNO5(A) NOT STUCK IN STANDBY | [b:96fb8e392f]I WAS USING SKY REMOTE COTROL WITH MY MATSUI TV 28WNO5(A) WHICH WAS WORKING WELL UNTIL FOR SOME REASON THE TV WENT INTO STANDBY AND I HAVE NOT BEEN ABLE TO SWITCH IT ON.I HAVE TRIED ALL TRICKS I POSSIBLY CAN WITH NO SUCCESS.
PLEASE HELP. |
04-10-2008 | ultravox eeprom bin file | I need to programme the eeprom in ultavox cas2106 21" chassis and hence i need its bin file.Otherwise i need to buy a ready programmed chip if available. Any help appreciated. |
04-10-2008 | | Sounds strange to me that initially you could get a sweep across the screen either horizontally or vertically.
That sweep appears only once subject to the feed probe and the settings on the sweep rate, pulse level, volts - micro or mili, trigger level, a |
04-10-2008 | Need Canon LV 5500 multimedia projector service manual | Dear All, I need a service manual for Canon LV 5500 projector. Please help me. Thank you in advance. |
04-10-2008 | | The culprit is the jungle chip, does not oscillate to the hor. driver transistor though has the 3v. when it oscillates the volts drop to o.6 about.
a new jungle ic solved the problem. |
04-10-2008 | MP3 player - car charger - please help | I hope this is the correct forum to post in as I need some advice on a car charger for an MP3 player. I currently have a Vusys MP3 player although the company does not do a car charger and is now defunct. I am aware that I can just use a standard invert |
04-10-2008 | mitsubishi vs4571 | friend brought this tv to me. picture he says just went out one day. no picture or osd. sound only. replaced vertical ic. (started with the most probable idea, or so i thought.) still no picture. any ideas? |
04-10-2008 | | Replace IC 401 (LA7838) and C406. 100 @ 35v. |
04-10-2008 | JVC no power | JVC 36" tv.
It has no power the redlight for power does not turn on.
tv does nothing. is there fuses etc. that i can check any ideas.
Greg |
04-10-2008 | | Got a model #? |
04-10-2008 | When I play a Dvd all I get is a black screen with AV on it | When I play a Dvd all I get on my tv is a black screen with AV on it. My scart leads are connected. What else could it be? |
04-10-2008 | | Do you get audio? |
04-10-2008 | | How about a make and model number? |
04-10-2008 | | I did try connecting a probe and shorting it. Was that not adequate? Oh no! I hope I haven't killed it. I'm trying not to do any work with the equipment live and the chassis open but I'm O.K. leaving the cover off just to look for light at the base of the |
05-10-2008 | vs4571 | resoldered yoke plugs. now when i plug in the center yoke the left yoke (sounds like its coming from there) makes an awful hiss. picture comes up though. |
05-10-2008 | vs4571 | any ideas on what might cause this or where to start? |
05-10-2008 | Magnovox 9p5511c102 projection TV picture fades | I own a Magnovox 9p5511c102 for about 10 years and about a month ago the picture started to fade and become blurry when I first turn it on. When the problem started, the picture would return to normal size and sharpness after 5 minutes of leaving the tv o |
05-10-2008 | Dell Monitor E197FPf needed | Dell LCD Monitor E197FPf, need the circuit diagram or chassis type. |
05-10-2008 | Orion TV w/ possible bad pic tube - can it be saved? | Ok, so I find this little 19" Orion TV sitting on the curb and thought I'd bring it home for shits and giggles. just as i thought, there's no picture on it. Being VERY careful, I opened the cabinet and turned it on, seeing if something was burnt out. |
05-10-2008 | PCB repairment | Hi,
Can anyone help in the following issues.
We have about 35 nos. set of "Ishikawa beat max
loom machine". At present about 10 nos are out of
order due to its internal faulty cards/circuits
boards. As per investgation it is found that |
05-10-2008 | looking for job in Toronto, Edmonton | Hi, I am a service technician at copier, printers, faxes, MFU, computers. I've worked for 9 years in an authorised service of Toshiba, EU. I repair also office eqipment of Canon, Xerox, Brother, HP, Lexmark, Konica Minolta, etc. I recharge, recicle and re |